EverBuild 406 Stabilising Solution 5 Litre

El producto llegó rápidamente. Lo usé hace un mes y hasta ahora el problema está resuelto. Recomiendo este producto.

Everbuild 406 Quick Drying Stabilising Solution – Clear – 5 Litre As a DIY enthusiast, I often tackle projects that require a solid foundation, and the Everbuild 406 Stabilising Solution has been indispensable. Here’s a comprehensive look at its performance: Product Overview The Everbuild 406 is a high-performance surface treatment designed to stabilize porous and friable surfaces. Its specially formulated, microscopically fine polymer emulsion penetrates deeply into dusty, chalky, and weathered surfaces, creating a stable base for subsequent decoration with paint, wallpaper, or tiling. Suitable for both interior and exterior use, it’s ideal for plaster, rendering, pebbledash, stucco, existing painted surfaces, brickwork, and blockwork. Application & Performance • Ease of Use: Applying the solution was straightforward. I used a standard paintbrush to apply a liberal coat. For extremely porous surfaces, a second coat was necessary once the first dried. The drying time was approximately 2-4 hours, depending on temperature and humidity. • Coverage: The 5-litre container provided ample solution for my project, covering approximately 25-50 square meters, depending on surface porosity. • Finish: The solution dries clear, leaving no noticeable residue, which is perfect for surfaces that will be painted or tiled over. Effectiveness I applied the stabiliser to a weathered brick wall that had been previously painted. After preparation, I applied the stabilising solution, and the difference was remarkable. The surface felt more solid and ready for painting. Subsequent paint application adhered better, and the finish was more uniform. Considerations • Packaging: One reviewer mentioned receiving a leaking container. However, my product arrived intact, and I had no issues with packaging. • Application Tips: Ensure the surface is clean and free from loose particles before application. For extremely porous surfaces, a second coat may be necessary. Final Thoughts The Everbuild 406 Quick Drying Stabilising Solution is a reliable and effective product for preparing surfaces before decoration. Its ease of use, clear finish, and impressive performance make it a top choice for both professionals and DIY enthusiasts. I highly recommend it for anyone looking to stabilize and prepare surfaces for painting or tiling.

Great product. Was unable to remove all paper of the wall due to old backing paper on insulation. This product stabilised, and made the process of preparing very easy.

Utilisé pour une dalle béton avec une ancienne peinture, le produit a vraiment bloqué le support , aussi bien sur les zones cimentées que sur les anciennes peintures .

Absolute fantastic stuff. Had different issues with efflorescence and chalky residues for years on numerous internal walls in my rented property. This stuff has absolutely killed both problems in an instant. I used 2 coats of stabilising solution (just to be sure as I am a bit OCD) but to be honest it’s worth doing for that extra piece of mind. If you got a large area to do, get a bucket, a large 3” paint brush (any old brush will do, no need for anything fancy) and simply brush it on the affected area on the wall. No need to be fussy, apply it quick and should only take a few minutes to do a large area. You will see it will leave a shiny coating so you can see what you have done as it is a clear solution but this is normal. Leave for a few hours and reapply. I then apply a Zinsser Bulls Eye 1-2-3 Primer Sealer paint again using the same method as the stabilising solution by using a paint brush to apply to the walls. Finally roller on your normal emulsion paint on the walls as normal. That’s it job done. If in any doubt to it’s effectiveness, just rub your hand over the problem area before you apply the stabilising solution and see what comes off (all the cr@p!). After you applied it, then see what comes off. You should have nothing at all so you know it has done it’s job. I have used this on internal walls but I would also feel very confident on external walls too. I know trades people have been using this stuff for years and I can see why😉 Best of luck and hope this helps.