Mount-It! Single Monitor Arm Desk Mount with Gas Spring, Height Adjustable Monitor Stand for 13–32 Inch Screens up to 20 lbs, VESA 75x75 & 100x100, C-Clamp & Grommet, Sit-Stand Desk Compatible

Excellent monitor arms, they are sturdy and well-made. I have had them for about 8 months now and they really check all the boxes. They articulate forward, back, up, down, and swivel well over 180 degrees. They were easy to install and you can reposition if you need to without hassle. I have two 24 inch monitors which is plenty, I feel like two 30 inch screens would be total overkill. I used to have a 49 inch curved monitor and it's just too much. I actually have two individual arms, one for each monitor. Mount-It offers a a dual-arm model, which I returned because that setup requires that each arm share a base, which greatly limits how you can adjust and configure the monitors. For example, the arms cannot be configured flush with the wall with the dual-arm model. Also if you adjust the height downward, the monitors will separate. In order to keep them together (side by side) as you vary height, you need each of them with their own arm so you can have enough space between each base. If you have two monitors, I would get two arms.

I've had the Mount-It! dual arm mount for quite some time, but I decided I wanted to go in a slightly different direction as the one downside to the dual mount system is an inability to adequately line up monitors with different bezel sizes to my liking. This is no fault of the previous mount, just me being a bit mildly OCD about getting my screens lined up. I also figure to be adding screens in the future so I wanted to try and find something that was a bit more flexible. I put this up against the Vivo single arm mount to see if one was better and this one is pretty good. It's easy to put together and easy to install a monitor to it. Rather than try to attach the monitor to the VESA mount while attached to the arm, this one has you attach the mount to the monitor, then slide it into a retention clip on the end of the mount. This makes placing and removing the monitor extremely easy if you need to make any adjustments to the actual monitor arm on your desk. The whole arm feels very sturdy, much more than the Vivo did and is able to hold much larger and heavier displays. It can hold up to 32" monitors, including ultra wide monitors as long as the weight doesn't exceed 20lbs. In the weeks since installing this arm, there has been no sag at all. The only issue I've encountered is there's a fair amount of shaking when even just typing, although I attribute this more to the desk not have a ton of support in the front. Either way, it's there and it's noticeable, particularly during extended typing sequences like this. So far that's the only drawback that I've encountered and again, could just be the desk. Overall, it feels very solid, holds my 24" AOC monitor up with no issues, and is definitely worth the price you pay for it.

This is a kick ass mount. It’s perfect. Holds my heavy 32 inch monitor. It’s adjustable, just do it right. BUT. It’s squeaky. The up-and-down motion squeaks. Also, my old one makes a loud pop, or crack at the beginning of the motion after it’s been sitting for a while

I bought a monitor arm from Mount-it about a year ago and have had no issues, so I thought I would give them another go and have not been disappointed. The arm has a decent reach and easily holds my 27" monitor. Its range of motion is good and hasn't required any re-tightening. The assembly takes some work, but with average DIY skill a person should be able to put one of these up in 1/2 an hour. IT DOES NOT COME WITH M4 SCREWS. You will need those to attach a monitor to the arm. M4 screws can be found at most hardware stores. The arm came with wall and desk mounting brackets. Mount-it instruction sheet was easy to understand and very helpful. This is the best monitor arm I've found in this size. The value for you dollar can't be beat.

EDIT 1-19-26 Still works like a dream for the same monitor, now different desk after 5 years later. Still pretty smooth but I don’t move it all that much these days now that I have a decent computer chair! This was used to hold my MSI Ultrawide monitor over my workspace so I don't have to use the included stand, which wasn't a bad stand but i wanted a range of motion so I could move my chair around and sit however the heck i want, and if I plan to do a sit/Stand I could. This stays in place when I want it to, easy enough to move when I Do need to. The covering of stand itself is Matte Black and won't glint in the sunlight as the window is right behind me and tends to shine into my eyes from the Echo Show below my monitor but the stand is stealthy as it was meant to be. Comparing to my husband's LocTek Dual Monitor stand [I'm not a fan of that but here's the link https://www.amazon.com/gp/product/B00ST052XS/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 ] Mine has nice rounded corners of the base and isn't bending in our overly cheap table that we're using as a desk until we can afford a better desk. Husband's LocTek with the weight of his two monitors and the design of the base is pointy and did break that part of our long desk so we needed to reinforce above and below with spare shelve parts. This Mount-it? No reinforcement needed even with the heft of my ultrawide! I love this monitor stand, I feel i got my moneys worth at $75.

When I picked this up from my mailbox I thought it was OVERLY heavy for a monitor mount. But after installing it I realize all that heft makes this arm STURDY as heck! The gas spring arm is smooth and makes moving the monitor up and down silky smooth once you adjust the tension per the instructions. Included instructions are easy to understand and the mounting equipment comes with different mounting methods (clamp or screw into your desk). I paid a little more compared to some of the other options, but I don't regret it at all. I feel like it's worth the money because it feels quality and won't need to be replaced. Comes with all the tools you need to mount it to your desk and adjust the tension. You will just need a Philips head screw driver to attach your monitor. It comes with all the hardware you need for the vesa mount on the monitor.

I really want to like this desk mount. However, the middle arm adjustment does NOT work. It supposed to be adjusted with the included hex wrench. However, it will not lock and will only move a small amount in one (+) direction. Since I can't lock the arm, the monitor (about 5 lbs) drops and just sits on the edge of the desk. I ended up putting the base that came with the monitor back on so it won't drag on the desk. I bought this item for my mother. It would have gotten 5 stars if the arm would lock so I could select the height I wanted. I will have my father look at it and see if he can do an after market fix. The instructions are a joke, just a picture showing where the hex wrench goes. I find it hard to believe this isn't supposed to lock, but it appears this is very poor design.

I have very heavy monitors at work. I have tried and failed to get good stands in the past. I bought a similar model, but for 30 pound monitors that worked awesome. So I decided to get this single arm version for my home monitor because I only have a single 23 inch monitor. So I got the lighter arm. However, this is not a cheap product. It is heavy duty steel, and is easy to put together. I’ve only used it for a couple weeks at home, but I’ve been using the dual arm monitor at work for several months. In both cases, it is working great! I highly recommend this product for correctly sized monitors. Please make sure your monitor is not too heavy, and when you get it, definitely read the instructions carefully so you can properly balance the spring in these arms.

Has a good grip on the table, I thought the little felt nubs weren't enough to stop the mount from carving marks into the table but I was wrong. No marks to be seen. The swiveling functions to have limitations though, so plan on how you want to use the full range of movements(eg play around with the arm and imagine how the monitor will move together with it) before putting the monitor on. Some of the wires will hide nicely inside the mount's cable runs but to get the best aesthetic I suggest either cable ties/covers or running the rest of the cables under the desk. Solid steel construction.

Very stable for holding up a 24" Acer predator monitor

Excelente producto y una súper atención

Nach langem Suchen diesen Arm gefunden, der einen 14kg Monitor tragen können soll laut Intrenet-Angaben. Heute kam er an und hat laut Verpackung nur 9kg Tragkraft - wie alle anderen auch. Mist! Geht heute noch zurück!

I have a 32" screen and it's held up perfectly.