Phanteks (P-GO240MPH_DWT01) Glacier One 240MPH D-RGB AIO Liquid CPU Cooler, Infinity Mirror Pump Cap Design, 2X Silent 120mm MP PWM Fans, 2X D-RGB Halos Fan Frames, White

Bought this to replace my failed Enermax 280mm AIO from 2017 that was mounted to an 8700k running at 4.8 Gz. With the previous AIO I was getting 38c idle temps, 48 to 50c light duty, 65c gaming and a peak of 90c on Prime 95. After lowering voltages a little I got the max down to 85c and 35C idle temps. I figured that was the best I could get without investing in a better cooling solution.Once I installed this unit my idle temps were 31c, light duty stuff an around 35c, gaming 45 to 50c, and max temp is 69c on Prime 95. Even with the testing program "heavy load" which is more stressful than Prime 95 I was still just at 70c. What a difference.Recommend using CPU fan header to power PWM pump, or additional CPU fan header if your MB has one. Daisy chain the two fans which they're already set up for then use the extension to reach the other CPU/or other fan header. Being able to set your pump and fans to run at lower RPM's keeps things quiet and efficient.Pros - quality build - slim water block, clearances fine even with all DIMM slots populated - no RGB on fans (Not everybody wants RGB!) - very tasteful infinity mirror on removable magnetic water block cover - doesn't require USB which is a huge plus - the single 3 pin RGB (D-RGB) which is the same as 5 volt addressable RGB cable comes out of the removable water block cover if you choose not to use the lights in the infinity mirror - Phantek fans are legendary for their static performance and CFM at low decibel levels - PWM controlled pump (I have mine set at 60% speed which is ultra quiet and more than sufficient, hooked to CPU fan header so it will ramp up if needed) - Fans can be run at low RPM and still cool well because of great static pressure qualities - comes with everything you need plus an extra tube of thermal paste.Cons - could have used black fans on non RGB "MP" versions - radiator a bit long, check you case for fit. If it's not too long then that's actually a pro.I watched reviews and this unit cools newer high end CPU's just fine. Good deal for the price.

The quality of everything is top notch. Product works great. I was on the fence between 240 or 360mm and this 240 keeps my Temps low enough.The cooler comes with more than enough screws of any sizes you could need and all the hardware for most any current processor. The packaging was excellent and all parts look great!The only problem I had was that one of the rgb halos was acting up. I emailed Phanteks and they sent out a replacement the next day.

The AIO itself is great.Read a review saying that this fits the Phanteks Evolv Shift XT, but it doesn't.... not really.I managed to force everything in, but the radiator and fans *can't* attach to anything.The case can handle 140 mm fans, but not if there are ALSO hoses from a radiator.I was able to leave the radiator and fans "floating" above the mounting plate by about an inch, to let the hoses clear the fans. Very bad fit. Also there are concerns about kinking and abrasion.Phanteks website was terrible to determining compatibility

The media could not be loaded. The Phanteks 240MPH AIO hardware quality is good all around especially around the pump and hoses. The pump came with thermal paste already applied for easy install on to the CPU, Phanteks also provides you an additional tube of paste if needed. Plenty of screws and addition attachments CPU frames if I every decide to switch out the CPU. Hose length is good for placement anywhere in most boxes.I do have two complaints about the pump first is the whine at whatever CPU usage. I can say now after a month of varying usage that the pump is "broken in" and I have tried adjusting it's placement as well but I still get the low grade sound (see video). When the pump is at 100% it is very noticeable (adjust this in my BIOS), I find it bearable at the lower pump/cpu usage and thankfully I wear headphones a majority of the time so it is at this point a minor complaint (but I do think Phantek's should look into it). Second is the length of the hoses, which I understand why it's designed like this, but the hoses touch my GPU or the front of my case visually (personally) it bugs me but has no real impact on performance of the AIO so again a minor thing.Overall I am happy with the Phanteks 240MPH AIO for the price, build and quality.Pros: Hardware quality, easy installation, infinity mirror RGB cap for AIO, all the extra bits, cools what it needs to at every load, enough hose length to place where you need to in your case.Cons: Pump noise at mid-high CPU load, pump hoses were a challenge to get into the right spot (they still rest on top of my GPU)

Super easy to install. Use the recommended above CPU mounting for great ventilation of the ambient case temperatures. Also zero noise or issues due to improper mounting. I highly recommend you look this up on YouTube Just Google proper mounting of this particular item and you will see a plethora of information. Great product I wish I had bought one sooner. My overall CPU temperatures dropped dramatically in high load situations which would have caused throttling on my previous setup.

So far i love it, looks futuristic, takes the heat of your system like there's no tomorrow, fans are so strong that can can create a negative presion on the case in exhaust mode on the top, in my case i have 3x140 phanteks intake and 1x140 exhaust all in pwm and i feels is even presion.The top of my case (phanteks Evolv x ATX) gets very hot on top in heavy gaming (weather temp 31c), it means the heat is getting out of the components as intended. i have a AMD 5800x and MSI gaming x trio 6800xt system.