Glass Cutting Oil for Glass Cutter Tools, 4 fl oz with Dropper | Smooth Score Lines, Reduced Wheel Friction, Handheld & Oil-Fed Cutters, Mirrors, Bottles, Tiles, Mosaic & Window Glass

Its quiet and runs great. Good value!

Works great! I have been doing my cutting freehand for about a year, so I am reviewing from the lens of someone who couldn’t get a clean cut semi-consistently (I only successfully cut two bottles out of a dozen broken ones). The o-rings fit very well on standard bottles, and put enough pressure on the scoring area that I only need a single ring for cuts close to the neck. The gloves were tiny but I was still able to use them since I didn’t have any on hand. I haven’t tried it on smaller bottles but I assume I would need to use the hand tool still. I didn’t read the instructions as I have cut glass before, and I was able to get a clean cut within two tries! The included sandpaper was a little finer than I am used to, but I was already planning on using my own silicone sandpaper. Highly recommend!

My wife needed glass shelves cut for her curio cabinets. I was having difficulty cutting the glass without breakage. I used this oil on my glass cutting blade and I was able to cut a shelf without issue. I think my blade just needed lubricant so it could glide and this oil did the trick. Now on to completing the remaining shelves she requested. Worked well, easy to use, would recommend.

I needed something to help with a large number of long (29") cuts with my new tile cutter. This product worked great. The ceramic tile cuts will show and the edges needed to be very smooth and even. This oil did the trick. The project looks great AND the customer, who is VERY particular, loves it.

We bought this because we are building partial walls out of cut bottles. And boy-oh-boy did we need to find an easier way! This little unit works exactly as advertised. Keep in mind that it WILL NOT cut the bottle all the way thru… it’s not supposed to and that expectation is totally unrealistic. It simply scores the glass. We have cut everything from wine bottles to beer bottles to Jarrito bottles and everything in between. If the glass is smooth and not ribbed, it’s going to work. While it’s easy to use… you have to follow the instructions and be patient with the process. Any failures is not the fault of the unit itself, it’s simply the luck of the draw. Not every bottle is going to cut perfectly. There are a lot of variables…. Including the thickness of the bottle. We had been cutting bottle after bottle all day with a lot of success and then tried a Bud Platinum bottle (for that beautiful blue glass) and it shattered almost immediately. It was MUCH thinner than the others and our usual amount of pressure was too much. So we adjusted our technique for different types and have now had great success with the Bud, as well. TECHNIQUE FOR SUCCESS: We found that getting the label and all of the adhesive off first is crucial. You don’t want to dull the blade or have the blade press the adhesive into the exact spot you expect to cut cleanly. Soak the bottles in soapy water, the labels will slide right off. Then we sprayed a Dawn/rubbing alcohol/water spray and used a wire brush or other scrubber, steel wool, etc to get that adhesive. SOAKING in soapy water was way more effective (and cheaper) than Goo-b-gone and all that other stuff. Now you’re ready to use the cutter. Be firm but not crazy. Don’t monkey the heck out of it. Pay attention to where you start the scoring line so you can join it perfectly. DO NOT go around and around… one time only. It won’t look like much but it is enough. Once scored, we would spin the bottle in a pot of VERY HOT BUT NOT BOILING water, heat it up, pull it out, set the bottle sideways in a frying pan with the neck raised on the edge of the pan and slowly spin it while holding an ice cube on the score mark. Repeat as needed: Heat, ice, heat, ice. Sometimes it releases immediately and sometimes it takes a few rotations. But it works. We have been able to cut over 100 bottles so far and have not even changed the blade yet. Well worth the money! The design is simple and effective. It’s tedious work but this unit helps SO MUCH! Thank you!

This is a great grinder for stained glass beginners like me. I have never used one before and it is super easy to use. It is very compact which makes storing it super easy.

Works amazing. Easy clean up

So far it works great. Use a bigger one at my stained glass class so far just doing touchups on it. Happy with the performance. Easy to clean if you work on a tray to carry it to dump the water. Nice not to have to use a sponge (not sure how they do that)

Great product!

Wie beschrieben so weit gut

A good product to have with the glass cutter. Makes it easy to cut by having the oil.

It was what I needed to help with my leaded glass work

Ist gut, mit der Pipette die dabei ist, ist es leicht zu dosieren