LimbSaver AirTech Precision-Fit Recoil Pad for Wood Stocks

I was skeptical about the claims that "up to 70%" of "felt recoil" would be reduced by using the LimbSaver. My Marlin 444 generates about 2800 ft-lbs of energy at the muzzle and it can offer quite a sharp jolt at the other end as well. But the original recoil pad was worn out and so I took a chance on this recoil pad. Amazing! Remarkable! Wonderful! I can't say what the percentage of reduction in recoil was, but it was substantial and it was comfortable and it was much appreciated. The LimbSaver is a perfect fit to the rifle and it was easy to install. I am absolutely delighted with this product and enthusiastically recommend it to others who want to reduce the felt recoil of their rifles. It is well worth the modest price.

I tell you what this turned my .300 Short Mag into a pleasurable gun to shoot over n over n over again. I’d say it took about 50% recoil off my shoulder, not quite the 70% maximum but when you’re shooting a cannon any kinda reduction is big. The gun has a wood stock so it doesn’t kick as hard as a synthetic stock but still had thump too it before putting it on my Browning A bolt 2! Also the fitment is spot on no overhang or deficiencies lining up to the wood.

Let me start by saying i wasn't sure about buying this, but I said what the heck ill give it a try. I have a Tikka T3 chambered in .270 Winchester. When I went to sight it in she had a little kick! I am no little guy 6' 230 lbs and after sighting in and shooting 30 rounds my shoulder was beat. I needed something to tame the beast so i went looking, first thing I thought of was a Limbsaver. I found the original style at first but then I herd they had a new line so I checked them out. They looked cool but wasn't sure about how they would work or fit, but I went ahead and got one. It arrived sooner than expected like most Amazon orders do. I like most guys tore it open and put it on with in 10 minutes of it arriving, and it fit like a glove. It went on easy and was quite nice. It's really grippe like others have stated but that's not a bad thing in my book, and now to the range (back 40). I shot about 25 rounds and probably could of shot 100 this really tamed the beast. I am very happy with my rifle now the kick is gone, no more pain from the old pad. To some it up I am very happy with the Limbsaver It fits perfect and took all the kick out of my rife. If you are thinking of buying this then buy it, you will not be disappointed at all.

I have these on all my center fire rifles. They are much better than most factory pieces. This wasn’t the exact fit ( very close), I wanted, however, after trying different ones and using exact stock measurements. It’s the closest one I’ve found. I have a very old 336, without grinding, there may be no “ exact fit “. It improved quick placement of the gun to my shoulder, and makes practice shooting more comfortable and fun.

This pad worked great on my Benelli Super Vinci synthetic stock using the plate adapter supplied! My Benelli already was great at reducing kick, but let me tell you... it was a pure joy shooting a 3.5 inch turkey load today! I was so different I decided to waste five more dollars and shoot another round to see if it just seemed less because of adrenaline! NO!!! The turkey load felt like a dove load! When I can, I will replace my other pads on various shotguns! AMAZING!

I bought this for CZ 712 g2 (by Huglu). Firstly, took the buttstock pad off - it's made by a plastic plate with an attached (modlded) rubber pad. Carefully pulled off the rubber pad - it has three segments of two molds which can either be cut or slowly pulled out of the holes in the plastic plate they were molded into. Once the plastic plate was "free" it matches with the Limbsaver pad perfectly - used a clamp to secure the two then marked where the Limbsaver holes matched onto the plastic plate and drilled it using 1/16 bit. Used small long screws with washers to create pilot screw holes, and high viscocity cement glue for binding. This method allows for the fairly easy removal of the limbsaver and replacement. The whole setup looks outstanding and is made by OEM. Pretty stoked with how it turned out and the recoils mitigated even when using very stout slug loads. Secondly, this is an almost perfect figment for a Stevens 301 single shot shotgun (Sun city). Or equivalent Charles Daly. The AirTech is just a bit wider and a bit shorter than h OEM, but works with OEM stock holes and screws of the Stevens 301

Like so many others the recoil pad on my Benelli Vinci fell apart. A new Benelli Pad is a hundred dollars and currently not available. I purchased the Limbsaver Air Tech and it is a good replacement and is a good value in comparison to the high priced Benelli Pad. The Limbsaver pad does not dramatically reduce recoil. The Benelli pad is better at easing recoil. The Limbsaver also tends to catch or hang up at shoulder clothing to the point I had to reset the gun to shoot on a limited number of shots. The Benelli pad did not catch on clothing. To ease some installation frustration, put the screws, plastic adaptor, and pad together first and the snap into butt stock. Do not put adaptor in first and then try to fish screws and pad into adaptor as I did based on video instructions. Very frustrating !! If you can find a Benelli Pad and dont mind paying a hundred dollars for a short lasting pad, then stay with the Benelli. Otherwise the Limbsaver is a good long lasting replacement.

Needed to replace the petrified stock recoil pad on my old Mossberg 835 turkey gun. The unique 3" hole spacing of the synthetic stock meant I couldn't use the normal grind-to-fit pads, as they're all a 3.125" hole spacing. The only pads I could find were pre-fit, and I haven't had the best experience with them fitting in the past. I decided to give it another go, and the results were amazing! I can't say every shotgun will be like mine, but for my 835, the fit was perfect! Holes lined up correctly, and the pad size was as though it was designed by the factory. Using the supplied screws, it took only a minute to install, and you have a little "wiggle" room to adjust the fit to be even on all sides. Tightened everything down, and job done. I won't comment as far as recoil reduction goes, as that's subjective to everyone. I will say it's better than the rock-hard pad that was on there, though that is true of pretty much any new pad. I highly recommend!

it does stop recoil better than my beretta one i use 28g black gold would i buy again YES

As described.

These are a must for shooters, I put one on my Tikka T3X and it fits like a glove, This can lower recoil up to 70%, If you shoot any composite stocks you know , They all have a goo

Very nice

10803/10011, works for Tikka T3 and T3X! Amazing recoil pads, must have.