Question 1

Where can i find the differences between this one and the older model (https://www.amazon.com/dp/b015pr20gy)?

Accepted Answer

The only difference is in the POE spec.  The older model only supports 24v passive. Where as the new model also supports standard 802.3af/A POE.  So you would need to look at the specs for POE.  As far as how to tell the difference, I think the only way is that the box on the new model has a little blurb in the corner mention support for both.  The box background is white and the blurb is in a blue triangle in the corner.

Question 2

How many client devices can this product serve?  I'm upgrading my home with smart light switches and I need a product that will handle 50 or more.

Accepted Answer

This will not have a problem with 50+ devices, but that may generate a lot of traffic, if I were trying to do that I would keep them on a separate network from my other WiFi devices.

Question 3

includes the poe?

Accepted Answer

Yes, the PoE adapters are included with the UniFi AP AC Lite single pack.  However, they are not included in the 5 pack.   So, stick with the single packs and you will be fine.

Question 4

How do I install this?

Accepted Answer

I installed mine in the ceiling with two small anchors.  The unit is powered by POE (power over internet).  In other words, you can use either the supplied POE adapter which requires plugging your Ethernet cable into the adapter, plugging the adapter in, and then using a short Ethernet cable from the adapter to the ap unit or you can purchase a POE network switch.  I am using a POE network switch (ubiquiti 8 port managed gigabit switch with 802.3af POE).  On that switch, there are eight ports, 4 are powered and 4 are not.  To use the switch, put your input cable into one of the non-powered ports and the unifi ap into one of the powered ports.  The powered ports will supply the power over the Ethernet cable so the supplied power adapter is not needed.  It is important to note, that the switch is only a switch and will not supply ip addresses to the access points or anything else plugged into the switch.  You can purchase an ubiquiti gateway device to do this or you can use an existing router (I am doing this).  I currently plug have an Ethernet cable plugged into my router with the other end serving as the input into the switch (plugged into one of the unpowered ports).  If you do it this way, the router will take care of assigning ip addresses to all of your devices.

ASIN	B016K4GQVG
Antenna Location	Home
Antenna Type	Internal
Best Sellers Rank	#75,968 in Computers ( See Top 100 in Computers ) #278 in Wireless Access Points
Brand	Ubiquiti Networks
Built-In Media	Ubiquiti Networks UAP-AC-LITE WLAN Access Point
Color	White
Compatible Devices	Devices with Wi-Fi
Connectivity Protocol	Wi-Fi
Connectivity Technology	Wi-Fi
Control Method	App
Controller Type	Push Button
Coverage	Indoor
Customer Reviews	4.6 4.6 out of 5 stars (6,176)
Data Transfer Rate	1000 Megabits Per Second
Frequency	5 GHz
Frequency Band Class	Dual-Band
Global Trade Identification Number	00810354023521, 08103540235214
Has Internet Connectivity	Yes
Is Modem Compatible	No
Item Dimensions L x W x H	16L x 16W x 31.5H centimeters
Item Type Name	Access Point
Item Weight	0.3 Kilograms
LAN Port Bandwidth	1000 megabits_per_second
Manufacturer	Ubiquiti Networks
Maximum Upstream Data Transfer Rate	1000 Megabits Per Second
Mfr Part Number	UAP-AC-LITE
Model Name	UAP-AC-LITE
Model Number	UAP-AC-LITE
Number of Items	1
Number of Ports	1
Operating System	Linux
Other Special Features of the Product	Access Point Mode, WPS
RAM Memory Installed	120 GB
Router Network Type	wireless
Security Protocol	WEP
UPC	810354023521 053926218196
Unit Count	1 Count
Voltage	24 Volts
Warranty Description	1 Year Manufacturer Warranty
Wi-Fi Generation	Wi-Fi 5
Wireless Compability	802.11a/b/g/n/ac

Ubiquiti Networks UniFi AP AC Lite, Dual-Band 24V passive PoE, UAP-AC-LITE (24V passive PoE Indoor, 2.4GHz/5GHz, 802.11 a/b/g/n/ac, 1x 10/100/1000)

Details

Details

Description

Specifications

Common Questions