Q: what is the shortest amount of time you can do a test with this device? a home inspection last only a few hours..will it have to be left over night?

I own this unit. My experience is the lower the level of radon, the longer it takes to spit out a short term reading. Using it on my screened porch, it took 24 hours to show a reading of .54 which is generally understood to be the amount of level naturally occurring in the outdoors. I had levels of 15 confirmed in my basement via traditional test and this unit gave me an initial reading of 8 in just under and hour and continued to increase every 45 mins until ultimately stopping a 15 in just under a total 0f 12 hours. Since mitigation I have readings of between 1 and 3.5.

Q: I see there are air holes in the back, so if it is placed against a surface, won't it impede the airflow into the detector?

According to the company's website, the unit should be placed on its back (display facing upwards), on a flat surface, at breathing-level height, and away from windows, doors, air vents, etc. See https://support.airthings.com/hc/en-us/articles/115003370189-How-do-I-place-my-Home-radon-detector-to-obtain-correct-measurements- Or as their FAQ answer states: "You can just lay it flat on a table or a shelf. The air flows into the Radon chamber as usual." https://support.airthings.com/hc/en-us/articles/115001097069-Can-I-just-lay-the-unit-flat-on-its-back-side-

Question 1

how often does the tester need to be calibrated and how much does it cost to calibrate

Accepted Answer

To cut through all of the nit picking and posturing:  This is a home unit, not a lab instrument.  It will give you practical insight, not NIST calibrated precision.  On the other hand, we are talking about a gas whose concentration will ebb and flow.  As a home owner, you want to know is this "no problem" (0 pCi/L), "meh" (2.720).  So if you are a homeowner I think this is fine.  If you are a pro and you are using it as a quick pocket reference before setting up real monitoring, still fine.  If you are Sheldon Cooper, stop being mean to homeowners and go order something NIST traceable, along with a NIST traceable calibration reference so you can re-calibrate every time you use it.  That shouldn't cost much.

Question 2

Are we positive the readings are accurate?  I have now tested the first floor of the house and am getting a reading of 7.5 pCi/l.

Accepted Answer

We have two older (15+ years) Safety Siren meters that read 2.3 & 2.4 for both long and short readings and seem stuck even after a reset/retest in our radon mitigated basement.  The new Airthings 223 started a little over 2.0 and slowly dropped to 1.8. Yesterday I resealed the sump pit covers to the floor and the Airthings 223 1-day average already (<24 hrs.) dropped to 1.43. It seems to correctly reflect variations with short term readings. This could be just coincidental with random variations but I feel that it is reasonably accurate and responsive to changes in the environment. I’m about to buy a second unit to replace our old (tired?) meters.

Question 3

what is the shortest amount of time you can do a test with this device? a home inspection last only a few hours..will it have to be left over night?

Accepted Answer

I own this unit.  My experience is the lower the level of radon, the longer it takes to spit out a short term reading.  Using it on my screened porch, it took 24 hours to show a reading of .54 which is generally understood to be the amount of level naturally occurring in the outdoors.  I had levels of 15 confirmed in my basement via traditional test and this unit gave me an initial reading of 8 in just under and hour and continued to increase every 45 mins until ultimately stopping a 15 in just under a total 0f 12 hours. Since mitigation I have readings of between 1 and 3.5.

Question 4

I see there are air holes in the back, so if it is placed against a surface, won't it impede the airflow into the detector?

Accepted Answer

According to the company's website, the unit should be placed on its back (display facing upwards), on a flat surface, at breathing-level height, and away from windows, doors, air vents, etc.  See https://support.airthings.com/hc/en-us/articles/115003370189-How-do-I-place-my-Home-radon-detector-to-obtain-correct-measurements-

Or as their FAQ answer states:  "You can just lay it flat on a table or a shelf. The air flows into the Radon chamber as usual."  https://support.airthings.com/hc/en-us/articles/115001097069-Can-I-just-lay-the-unit-flat-on-its-back-side-

Asin	B00H2VOSP8
Best Sellers Rank	#2,378 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #6 in Gas Detectors & Alarms
Brand	Airthings
Built In Media	Radon sensor, 3 AAA batteries
Color	black
Customer Reviews	4.6 4.6 out of 5 stars (10,791) 4.6 out of 5 stars
Enclosure Material	ABS
Global Trade Identification Number	07090031102234
Item Dimensions D X W X H	1"D x 2.7"W x 4.7"H
Item Type Name	Corentium Home Radon Detector
Item Weight	3.52 ounces
Manufacturer	Airthings
Manufacturer Warranty Description	Airthings has a 5-year extended warranty available on all air quality monitors for consumers. Registration is required within 30 days of the purchase on the Airthings website. Registration is free and your statutory rights are not affected.
Mfr Part Number	223
Model Number	223
Number Of Items	1
Operating Humidity	95 percent
Power Source	Battery Powered
Product Style	Original
Sensor Type	radon detector
Unit Count	1 Count
Upc	854232008019
Upper Temperature Rating	104 °F

Corentium Home Radon Detector 223 Portable, Lightweight, Easy-to-Use, (3) AAA Battery Operated, USA Version, pCi/L

Details

Details

Description

Specifications

Common Questions