Silhouette America Silhouette Media-CLR-ADH Printable Clear Sticker Paper

This is the best clear sticker paper. It prints well. and cuts well. I also emboss it with embossing power and it holds up to the heat.

The media could not be loaded. After reading through mixed reviews about feeding this paper through a laser printer I decided to buy and try anyways. It worked flawlessly with the exception that - although it takes effort, I was able to scratch off the ink but I will seal the labels with something basic (krylon clear coat spray, probably) and these'll be perfection. I used a Ricoh C4503 model laser printer and set my paper to "thick" and to pull from the bypass tray. These turned out exactly like I hoped, color-wise, and were easy to peel and stick. I was able to remove the label after adhering it to the glass bottle and thankfully it didn't leave any residue but also didn't give me pause to worry about the integrity of the glue (the seal I plan on doing might serve double duty to ensure edges can't be accidentally lifted).ETA: Krylon sealer did not help; with some effort, I'm still able to scratch off the design. Oh well. Thankfully I don't suspect these labels will be put into potentially scratchy situations so I'm keeping the review at 5 stars, especially since I didn't technically use/print them per directions.

I was able to print full color without any issues. Even photos looked respectable. The resolution of the images was quite good. I printed photos and black and white fonts. I tested ink after only 30 minutes and it was dry to the touch. After an hour I tried vigorously rubbing it with a white cloth and only a tiny amount of ink came off (I would guess the same amount that would come off any paper), but it didn't mess up the print. I printed with an HP Officejet Pro L7780. One reviewer mentioned baking the paper for 1 hour on 190F. I tried this and it did not dry the ink any better for me, but the paper curled up and the glue page started to separate from the printed page after only 30 minutes. In my limited experience, I would not recommend baking. I also found the adhesive to be very strong, but I only tested it on painted surfaces of wood. I could not imagine the adhesive coming off as it was hard to remove when I pulled it. As far as the clarity of the paper, it is quite clear, but as some reviewers have stated, it does take on the grain of whatever you put it on. In other words, if you put it on a piece of painted wood that is not absolutely smooth, it will take on tiny air bubbles and not adhere totally smooth, but this is being very nit picky. It does a good job. I would guess smooth glass would take the sticker best, but it looked great on wood too. Your can mash it down after you put the sticker on to reduce air bubbles. But please understand, these are not big air bubbles. I did not use any templates or special software to print. I just used MS Word, created the document I wanted, set the printer to "other transparency films" and printed on the "best quality" setting. If you don't have that exact paper setting, I would suggest any printer paper setting that says "transparency paper" of some sort. If you don't have a transparency paper setting, other reviewers printed on "matte paper" with good results. Overall, this product performed much better than I expected considering some of the negative reviews suggesting runny ink or low adhesion. As with any paper, performance is going to vary depending on your printer, type of ink and the surface you're trying to attach to.

I bought these sticker sheets because I needed to label some glass vases for a bridal shower. I used a magenta color for my font, and it was a pretty thick font, but the writing hardly showed up once the labels were on the vases. I'm sure with a darker color ink it would have been fine, but I did not attempt to put the labels on until the last minute so I could not attempt to re-print them. The ink looked good as long as the white backer was on the labels, but once it was peeled away, I couldn't see it anymore. If I was going to fill the vases with something of a solid color, I think the ink would have been visible. The labels are thicker than Avery labels, so they actually didn't wrap around the curves of the round vase very well. Another reviewer said she used a hair dryer to get them to flex better and I would have done that if my ink showed up. It would have been perfect if I had a smoother surface and darker ink. In fact, I think they are very good quality and extremely clear (The Avery ones have a tint or haze, because they are not as glossy as glass).

I used this clear sticker paper with my inkjet printer to create transparent business logo labels and they were great. There was no smears.

These worked out beautifully for my needs, which was some small stickers to use for custom name tags. Tried with 2 different inkjet printers(canon & HP) and turned out really great and vibrant with both. The ink dried way faster than I expected, it was pretty much dry to the touch with no smudging straight out of the printer. The sheets are definitely thicker than a run of the mill sticker sheet, but that’s kinda nice considering you don’t have to worry about your stickers sticking to themselves or getting annoying wrinkles when you’re applying them.

This vinyl paper worked out pretty good for me, and I had no issues using it in my HP printer. The prints had very good quality, however they did need some form of clear coat to avoid smudging (which is to be expected). I just used clear packing tape over the image to act as a clear coat. As with all other clear vinyl papers, you need a light colored backing such as white to see colored images, or else they will appear translucent. Upon separating the adhesive portion from its backing, I noticed that the vinyl was very thick, and had more of a plastic feel rather than the rubbery feel vinyl should have. When applying the decals, you can easily see the edges due to the thickness of it. The thickness and "plastic" material also restricts the vinyl from adhering onto curved surfaces. This is a great product, but just not for my application