Battery Charger for Autel Robotics EVO 2,II Pro V2 V3 Enterprise RTK,Dual Drone,Rapid Multi Parallel Charging Hub Accessories

This charger works very well and it's faster than the factory charger/which gets pretty hot. The usb ports on it work equally well. This charger, DOES NOT get hot at all. With detachable cords I feel its made better, just seems it to me, I don't have charge issues with this like than factory one and the cords are flimsy to. Definitely buy this charger if your looking for another Autel charger or replacement. With this charger I'm able to charge 7 Autel batteries between 2 chargers and the remote, in half the amount of time, and my cell phone in one shot

Honestly, I wasn’t expecting much from this charger. I was pleasantly surprised at how functional it actually is. A previous reviewer stated that you may want to attach the individual cables to the batteries before plugging them into the charger, I completely agree. The only flaw with this system is that the charger cable that connects directly to the batteries is the major weak point. As long you’re an adult who treats their belongings with care, this charger will last forever. Additionally, it’s actually pretty light with solid construction. It fits perfectly into my backpack. I utilize a portable 250wh backup generator with the charger and have had no issues.

This works amazingly better than the Autel Battery Charging hub when charging 3-4 batteries at once. The hub has the ability to charge one at a time or all at the same time. I have found no difference in time span when selecting either option. Moving into this charger, there is a marked difference in charging 3 batteries at once, you get fully charged batteries in <110 minutes - all three at the same time. I purchased this charger to install in my truck next to the 2,000w inverter and back-up battery. This way I can drone on the go and retain full batteries and controllers. I was able to drive all over White River, Gunnison, San Juan, Pike and Isabel National forests droning for two weeks, capturing the fall color changes, and never had to wait for a battery or controller to charge. USAGE ADVICE: One process I have found to be the safest and most reliable means of connecting the battery to the charger leads is to unplug the charger lead from the charging unit. Plug the battery end to the battery, THEN plug the lead into the charger. Many times there are unfortunate opportunities to be off a pin when initially trying to plug it into the battery and sparks will fly. The Mavic 2 version of this charger has the same concerns and a couple times those sparks occurred, the battery would read full but the drone could not see the battery level afterwards making the battery useless. Save your battery investments by doing this simple but safe method of connecting batteries for charging. As an added measure, turn off the charger, disconnect the lead, connect the lead to the battery, reconnect the lead to the charger, then turn on the charger. This is the safest method to keep from shorting a battery. If you follow this method, this charger will be an incredible tool to add to your drone peripherals.

I have several chargers...same type, with minor differences...for the Mavic Pro, Phantom P42.0 and now this one for the Autel I and II drones. I have the original Autel Evo and now the Evo II Pro. This charger works great to charge multiple batteries at once, without issues. To avoid any mishaps connecting up the batteries, I leave the charger powered OFF, connect batteries, then turn the charger on. You will want to leave space around this charger, as it will get warm, so make sure there is adequate air flow around the charger and the vents are not blocked. Pushing that much power to the battery(s) would get just about any charger warm to hot. No worries on this one though, well worth the price. Been droning for years now and highly recommend this charger.

I purchased this because the multi charger for the Autel Evo2 Pro uses the same power supply the drone comes with so it takes forever to charge the batteries. With this I can charge 3 far more quickly. Of note the charging circuitry is actually in the battery housing. My original reason for getting this was just to get the cables that go from the battery to the charger. I built a small box that allows me to use these cables with the second batter I have in my car with a device that protects my car battery from being drained so I can always start the car... An isolator. Now, I can charge me drone batteries in the field with my second car battery, a 50 amp hour lithium iron phosphate battery, or at home using the mains. This seems to me better made than I expected... Pleasant surprise. I wanted to get some extra charge cables and send a note to the company. They got back immediately to me and I was easily able to get the cables. It is really nice to be able to communicate so easily with a company. Their customer support is excellent. Edit: I have had the charger now for over 6 months. I have not had any problems with it so far. It seems well built. I purchased a soft case for it right here on Amazon.

The first unit worked for five charges. The replacement unit worked for about 8 charges. When the units start to mess up you hear a frying sound and then the unit goes into what seems like a protection mode and it shuts down. It does not matter how many batteries you are trying to charge or which plug port you are using. Looking at other reviews it seems like I'm not the only one who has had issues. I tried to contact the seller but they give a bogus phone number on their Amazon listing. Amazon said it was past the return date so they wanted to charge me an $11 restocking fee.

I was a little reluctant on buying the charger because there were no reviews at all on this. So I will be the first. The charger that came with my EVO II burn up the first time I used it, I tried contacting Autel but the emails have been going back and forth about warranty, so I moved on to this. I received the charger and it had simple instructions. You plug it in and turn it on. Very simple. I plugged it in and connected the EVO II batteries and they started charging. The instructions said if the battery was more than 90% it may not charge, but I added the second batter which was charged the day before and it started charging. I also added the remote to the USB and it too started charging just fine. Well one of the batteries finished and it stopped that port and the light turned green, the other stayed red and continued charging as expected. It also has little fans in it to keep it cool, after one hour the charger was still cool to the touch and charging away. So far this is an awesome charger, and if you get an EVO II, I highly recommend getting this charger as you can charge three batteries at once and the remote control as well, plus still have an extra USB for your phone if you need to charge your phone too.

I tried to top off a charge and the charger would not do anything, I had thought this would be good as I wanted to fly later that day. The instructions for all drones is to be fully charged. I was very concerned that the charger was not working until I drained the batteries by flying the drone and then used the charger and it worked perfectly. Being able to charge everything at once is a big plus as I have 3 batteries for this drone. So the long and short is so far I would buy again. Hopefully my opinion stays that way and the charger continues to perform.

Awesome