EN1 48"x24" One-Piece Standing Desk, White

I have owned this desk for a few months and have benefited greatly. The quality and value is greater than the cost for certain! After much research prior to purchasing an adjustable desk, this one kept my attention throughout all the searches, comparisons, cost, quality, customer service etc. While this desk kept beating the comparable options out there, I chose this one even though there were some random negative reviews out there. IF you read the instructions first, then start assembly, you can't fail. For those who had performance issues, maybe the rushed through the instructions and potentially affected the expected performance of the desk. I just don't see how this product wouldn't function exactly as stated unless the purchaser goofed something during assembly. Prior to owning this desk, just like you, I wanted and hoped that having the option to stand and sit throughout the day would be a healthy benefit over complications of sitting too long. I no longer have any issues ( sore back, sore feet, etc) so if this is your first time considering a standing/sitting desk, regardless the brand- you'll probably benefit too. I was able to assemble the desk by myself and the instructions are straight forward and easy to follow. Within about 30 minutes, my desk was up and running. One concern I had since I purchased 48" desk was stability and potential wobbling but the desk is very stable even at it's highest setting. Part of the feet on my situation are on carpet and part were on non carpeted area (the rear feet). It was easy to add a block of wood under the rear feet and by using a level, I was able to have a perfectly level desk. I read where some buyers were assembling the screws with a power driver and if I remember the instructions recommended this for the attachments under the desk. I also read where some found the screw stripped out from the wood and would no longer hold a tight grip. This is probably from someone not knowing how to adjust their power driver and they over turned the screw. I use my power driver often and know well how to adjust the setting to only tighten and not over tighten. However, I took an extra amount of caution and hand screwed so I could feel the tightness and prevent any mistakes. I would recommend this since there isn't an option to test power driver settings prior to setting the screws. Especially since the desk material is pressed wood. I did pilot drill the holes when necessary, which prevents mistakes as well. The second concern I had prior to my purchase was, what if it arrives and it's not as great as the reviews listed and what will the seller's customer service be like if I have a problem now or in the future? I have experienced both now and I can honestly say, I don't know what I am happier with, the desk or the customer service? When the desk arrived, I realized I mistakenly ordered the 40". Prior to contacting the seller, I went ahead and ordered the 48" desk, then contacted the seller and asked if I could return the 40". Even if I had not already purchased the 48" desk prior to contacting the seller, they would have helped me make the exchange. ( I was just in a hurry and didn't want to wait for the seller to receive the returned desk and then order the 48"). The seller reached out several times updating me on the process of my return and even helped me with repacking the desk to be returned. As for a Why Not to purchase this desk, I don't have a reason to share that I would not purchase this specific desk and especially from this specific seller. Until you start shopping for adjustable desk, you don't realize there are so many options out there it can be time consuming comparing, but hopefully my review will save you more time than I spent to make the right decision for my needs.

I've had this desk for a couple of years now and I really like it. I had help putting it together but have had no issues with it. I don't stand often but I do adjust the height regularly depending on if I want my chair arm rests to fit underneath it or not. I love the size, it fits my monitor, laptop with its own stand, and my cat with no issues. My only complaint is that I wish these could go a little lower, thats true for most standing desks. But no knicks, no scuffing (I keep a pad on it), and it looks as good as it did when I got it and I work and study here daily. Completely solid and sturdy. Well worth it

My wife's new job allows her to work from home 3 days a week. Her company gave her a stipend to set up a functional home office to meet their requirements. Since they have electric adjustable standing desks in the office, she wanted one for her home office. We purchased this during Prime Day for both the deal and based on the reviews. Some of the reviews discussed issues assembling the desk such as miss-aligned screw holes, missing holes, poor assembly instructions, and other issues. I'm here to tell you that I had NO issues assembling this desk; and, I did it completely by myself—you just have to get creative when supporting pieces of the assembly while securing others. There were no missing or misaligned holes, and all the parts that were required were in the package. I will say that the assembly instructions were a bit sparse and had minimal errors. One of the errors was the direction in which to screw the bolts into the cams. The instructions say counter-clockwise but the reverse is true. Just remember: "righty-tighy, lefty-loosey." Also, when attaching the almost completed structure to the desk board, there's a step that requires 2 screws that go from the middle of the cross beam into the desk board. Those screw holes in the desk board do not exist; you have to make them. I simply used hand pressure to drive the self-driving screws through the holes in the crossbeam in into the desk board. It worked out just fine. Also, use a power drill to screw in some of the screws when you can for convenience. Anyway, you have to look at the diagrams with a 3-D mental perspective. Sometimes you have to rotate the images in your mind to see how a piece fits in with the other pieces. There's not much written instructions to go by. I have a 3-D mind so it was easy for me to rotate and scale the diagrams in the assembly booklet to get the job done. It took me about 2 lazy hours of putting it together. I could have done it in one but I was just taking my time, listening to music, getting snacks, and petting my dog in between steps. One MAJOR piece of advice I'll give you is to WATCH an assembly video or two of this model or similar models on YouTube first. Talk about a 3-D perspective, these vids give you a great idea of what you're getting into with assembling this desk. Anyway, don't stress over this; you got this! As for the functionality of the desk: so far, so good. The motor works, the controls work, it's whisper quiet, and seems very sturdy for 2 big monitors, a laptop, and a keyboard & mouse. Knock on wood that the electric adjustable system lasts a long time. They seem to have a couple of ways to reach customer service should you need any assistance. Hey, my wife's happy, that's all that matters! 😆 Good luck! 👍

I love this desk! I had been looking for an adjustable desk at a good price for a while, and this one was definitely worth it! The corners aren't sharp, so if you tend to walk into corners of things, this is definitely a safe option. It was pretty easy to put together you don't need any electrical tools, just a bit of muscle at some point. My two main issues with it are the cable management and the screws that connect the top of the desk to the actual legs of the desk. It's hard to get them all in without destroying a bit of the underside of the table, but just where the screws go, the top of the desk is fine. Just the holes at the bottom don't align too well, but if you try hard enough, you can get them all in somehow. The cable management was nice at the beginning, but they eventually either snapped or just unstuck, so if you do get this desk, I would recommend planning the cable management beforehand and maybe getting a kit specific to cable management. But overall, the desk moves very smoothly and looks great, especially for the price!!

So far great! I needed a stand up desk that can survive middle school action! It’s sturdy and looks very sharp. I did what research you can and went with this one. Great value, easy to assemble.

I was shocked at the high quality of this standing desk! This thing is rock solid. It's heavy and the metal construction is thick gauge and superbly built. The table top is one piece which is challenging to find at this price point, if not impossible with other brands. It's flat, smooth, rigid, and well made.The motor is quiet and the operation is smooth. The stability at the top is very good. Some videos say there is a wobble on some standing desks. I would not call it a wobble on this model. Maybe a slight vibration which is hardly noticeable. This thing is stable; even at the highest setting. While some complain about a 24” depth being too shallow for a desk, consider that a minimal table top size increases overall stability. Also, if you add monitor arms, you can get plenty of distance between your eye and the screen while maintaining adequate desk space. Also, a 24” depth fits easily through all household doorways. If you go larger, you may have to disassemble a desk to get it through the door. I suppose a large computer tower may be a bit large for 24” but if you are running a mini PC, smaller tower, or laptop, you are good to go. This desk is ideal out of the box for people around the height of 6'-4”. With my feet flat on the ground, my arm comes off the arm rest at a perfect 90 degrees to rest comfortably on the table top when at the lowest setting. If you are shorter, your arm may rise up and be uncomfortable. This may require you to raise your chair up and get a foot rest for comfort. Or, there is about 9” of space underneath the desk where you could drill some holes for a slide out keyboard tray. This would allow a shorter person to find a comfortable position. There is plenty of height in the standing position for a person of 6'-4” as well. The instructions are perfect and all the bags of screws and such are labeled by letters. The setup was very straight forward. The packaging was very well done. All around, it's great! I just hope the motor holds up over the long run.

Tl;dr: Pretty good quality standing desk at a good price with great customer service. Definitely worth considering as a budget standing desk. Background: I spend a lot of time using my computer, so I bought this as a way to not spend *all* of my time sitting on my chair. I bought this for about $150 at the time as an intro standing desk and didn't want to spend $300/$400+ for a "good quality" standing desk. I've have been using this desk since April 2024 (currently Nov. 2025 at the time of writing). I adjust the height a few times a day about every other day, so the motor see regular usage. I have two monitors, a 27-inch and a 24-inch, and they fit perfectly fine along with other small miscellaneous items. I am 5'10" (~177.8 cm) and I have no issues with the height of this desk. The desk over feels like pretty good quality stuff, specifically the board and the desk legs/columns. It can be argued that the control panel feels cheap, but it's never been an issue for me. Also, the control panel has never bugged out on me either. The motor is quiet enough, I guess. This is my first standing desk so I don't really know. The motor isn't obnoxious during use, at least. Assembly was easy and instructions were clear, didn't take me too long to set this up. The desk is sturdy for the most part. At the custom setting for my standing height (41.5", I think), there's very slight wobble, but not anything too crazy. Depending on how sensitive you might be to noticing wobble, this may/may not be an issue. Personally, I don't mind, and I've never had to worry about losing focus on what I'm doing/reading or tipping the desk over. Around May 2025, one of the legs for the desk started making an incredibly loud creaking/whirring sound every time the desk descended. I emailed customer support through their website (not through Amazon), and they responded pretty quickly. Although we didn't figure out what exactly the issue was, they ended up sending me a whole new desk entirely as a free replacement rather than a replacement leg. If I decide to get a bigger and/or better quality desk, I'll definitely keep this brand in mind. Will probably come back and edit this if anything changes, since I really do like this desk.

I bought this desk in January and have been using it for the last 8 months. Truly, for the price point I thought it would be garbage - cheap materials, ridiculously difficult to put together, motor that quits in a month after assembly, but I was wrong on all counts. It’s nice looking, I (a smaller woman) was able to assemble myself in about an hour with no issues! After 8 months of using it a couple of days a week it has made such a difference in my work from home days. If you’re looking for a standing desk at a reasonable price point, I strongly recommend this one.

I purchased two of these adjustable desks for our home office. Desks are sturdy and work perfectly in our home office. It was easy to set up, the adjustable desks worked great, and at a reasonable price! About 8-months in, the motor stopped working to move the desk up. I reached out to the seller directly, and also scrolled through the reviews. One reviewer posted the troubleshooting instructions (the same instructions we received from the seller only moments after) - and it was very easy to follow and resolved the issue! Even with the hiccup and due to it's quick resolution, I would recommend this adjustable desk!

High quality & easy to sssemble, would definitely buy again

This is a professionally made product, well thought off and the motor function is extremely useful. The finish is clean and the whole experience is a good job Flexispot!

OMG! I am in heaven. This table is saving my back big time. As a sewist, it's so helpful to be able to adjust the table height for various stages of creating "masterpieces". With the touch of a button (memory!!!) the table adjusts to the preferred height for cutting, pinning, and other assembly activities. In addition to meeting my functional needs, this table looks (and is) substantial. It was a breeze to assemble (alone!). What a great purchase! Online shopping wins, hands down, again!

I am super happy with this purchase! The desk is very high quality for the $. The tabletop (I went with the wood-look) is much higher quality than say an IKEA desk. It was super easy to assemble and came with great instructions. It’s very sturdy and stable when in standing position - actually better than my desk at the office which would have been significantly more expensive. I’d say the only thing I’d improve was that I wish the motor was a little faster to go up and down, but I know you can upgrade to their other models and have that perk - this is one or their most basic models. Flexispot customer service was also great. FedEx had originally delivered my desk to the wrong address and their team was very quick and responsive, solved the issue quickly.