CHAMPKEY Premium Rubber Golf Grips 13 Pack | High Traction and Feedback Rubber Golf Club Grips | Choose Between 13 Grips with 15 Tapse and 13 Grips with All Kits

TL;DR - great value - easy to install - would definitely suggest for grips on a budget - color can smear if you get the solvent on the grip when installing (but for the value, that's fine in my book) Let me start by saying I have never had clubs regripped. I've always used hand-me-down clubs and just used whatever grips were on them. I've ranged from a 12 handicap when I was in high school (20 years ago) to a 25 handicap (now) since I only play a few times a year as an adult. I purchased my own set of clubs 6-7 years ago, but they were used, and had aftermarket grips on them (no idea of the brand) and they seemed fine. I've cut back on some other hobbies lately in order to spend more time golfing. I've golfed 4-5 times this year and have noticed my grips flaking off in my hands and not doing great when I'm super sweaty. At this point I started researching new grips and how to do it at home to keep the budget down. When I googled golf grips, and the first results were $200+ for a set I about fainted. This led me to searching for budget grips and came across these. I found a few YouTube reviews on them and some posts elsewhere and they all raved about these grips. For $40 you get tape, a knife to cut off the old grips, solvent, a rubber vice clamp insert, and 14 grips. That's well worth it to me so I gave them a shot. I got them in 1 day (thanks Amazon) and immediately installed them. Install time: this took about 2-3 hours for me. I've never done it before and didn't have a vice clamp to use so I jerry rigged a setup and went to town. Pretty easy but my hands were definitely tired and a little roughed up at the end. Feel: They feel great. My old grips were a very soft/squishy material. These are much harder. The diagram on the listing shows that they are a "soft rubber" but if that's the case, I'd hate to play with a "hard rubber". I hit into a net with my 7 iron for about an hour today, and my non-gloved hand is definitely scraped up and I can feel calluses building. This is fine to me, and I enjoy the tackiness and feel of the grips, they're just SOOO different than my old grips. Value: worth it. buying the tools included in this kit alone would put you at almost half the price ($15-20). I'm sure they're not the BEST grips in the world, but at my current skill level and amount of playing, I'm sure they'll be fine. As some other reviews mentioned, you can definitely smear/fade the coloring on the grips if you get a lot of the solvent on the outside of the grip. I did this on one of the first ones I gripped. After that, I just made sure to be a little more cautious and detail oriented to prevent the solvent from getting everywhere. Longevity: Can't speak to this yet. After install, about 10 hours of waiting, and then hitting, they seemed very solid and installed well. No slippage or rotating on the shaft. I only play every 3-4 weeks right now and live in the Midwest so can only play a few months a year anyway. I do hit into a net pretty regularly in my garage though, so I'll keep an eye on them and update after some time has gone by.

I couldn’t be more pleased with these Champkey midsize grips. The feel, comfort, and quality of materials are excellent—truly impressive for the price. The design is sharp, and the performance exceeded my expectations. What really stood out was the attention to detail in the packaging. It included a clear, easy-to-follow installation flyer and a surprisingly sturdy grip removal blade—much better than I expected. The grip tape included was by far the easiest I’ve ever used, and I’ve done five grip replacements myself. This purchase was a win all around. Champkey has definitely earned a spot on my go-to list for future golf gear. Even Mr. Short Game on YouTube backed up what I experienced. Thanks, Amazon!

These are solid rubber grips that feel great in my hands. This is not a difficult process and it's something that most anyone can do. Instructions would have made it much easier. A couple notes and lessons learned on the whole process: 1. The description of the item is confusing and needs to be changed. The title of the product asks you to choose between two packages, but there is no option to choose. You have to read the fine print to figure that there is no option on the item you are looking at. I wasn't 100% sure I ordered the kit until it arrived because of this confusing option with no options. Solution: There should be either a drop down selection with the options "Grips/Tape Only" or "Grips/Tape and Installation Package". - OR- Create two separate listings and change the titles to match the options. 2. If you don't have any tools then you should get the kit. In retrospect I wouldn't get the kit since I have a razor knife and mineral spirits (yes the liquid is mineral spirits), and I didn't use the vice adapter (held club in free hand). I needed a hook blade for removing the old grip. 3. Removing old grips can be messy and tedious. Using the hook blade to cut off old grips works great, but you may have a combination of old grip, tape and adhesive to remove as well. Use a regular razor knife to carefully remove large pieces from the shaft. If you have graphite shafts like me, be careful not to cut into your shaft but scrape it at 90 degrees. To clean your old tape and adhesive off, use the mineral spirits to soften it and wipe it off with paper towels until squeaky clean. A small residue is okay since the tape is designed to work with mineral spirits. 4. I really could have used detailed instructions which were not provided. I checked out a couple online videos to get the general process figured out, but wasn't sure about the 2-sided tape. Which side of the two sided sticky tape to put on the club? I found out that the white backing is stickier than the blue side of the tape, and the blue strip is supposed to be used to press the tape onto the club. ** PEEL THE WHITE BACKING OFF FIRST AND STICK IT TO YOUR CLUB, THEN USE THE CLEAR BLUE BACKING TO PRESS IT ON FIRMLY. THEN REMOVE THE BLUE BACKING LAST *** I 5. Mark each club with a sharpie to align each grip identically, or use an existing label on your shaft. There is a logo and a small < on the grip that can be used for alignment. 6. Installation can be a little messy as well. Get a paint tray to collect the mineral spirits as you go through this process. Make sure that the inside of the grips AND the newly installed tape are lubricated completely. First fill the grips with 1 oz of mineral spirits plugging the small hole with your finger. Then put your other finger into the other side of the grip and swish the liquid around the inside of the grip for at least 30 seconds, then let drain on the shaft/tape and into the tray. I would use a 1" paint brush to thoroughly wet the tape with the spirits now resting in the tray. If you can't get the grip installed within a minute of wetting the tape, take a couple seconds to re-apply more spirits to it because it gets tacky quickly. Try not to get the liquid on your hands because the next step requires a good grip literally. 7. Showtime - putting your new grip on. You can use a vice with the tools supplied, but I opted to just hold the club in my other hand which worked fine. Getting the grip started on the shaft can be tricky and it may not seem large enough. I found that starting the grip at a 45 degree angle while pinching the grip 1/2" from the tip worked best for me. Once it's on push as far as it will go without stopping. Then hold the grip more in the middle to get it all the way on. The grip stretches when you pull it on and bounces back when you let go, so make sure it's all the way on. 8. Finishing steps are to tap the end of the grip on the ground multiple times to completely seat the grip. Now recheck your alignment. You can make adjustments in the next minute or so to get it right, and then set it aside to dry.

Great set of grips especially for the price. There was some doubt about the tape that's included , however it was precut and adhered very well. I'd recommend the kit bundle or go get some solvent. Makes the install alot easier. They dry quickly after install, just remember to stand club up on handle to drain. I used these grips on my taylormades and they fit and feel fine, I've played a few rounds, no issues.

For the price point in the quality, you’re definitely not gonna find better grips. Please do not go with Winn dri-tac grips. They are terrible, but are also a cheap option most people pick. If you’ve never put on grips before the tape quality matters! The provided tape is a lot better than the clear tape that come in the wolfgrips. (wolfgrips are similar price point) The picture I provided is not the exact grips purchased but I’ve used champkey grips many times due to their great quality.

Great grips. Wife's clubs had grips that were deteriorated... Purchased a regripping kit and did the in about 1.5 hours. Work great. Good feel.

Nice replacements for the old grips on my club. Learned after the first grip I replaced that you should be very generous on the solution so the grip will easily slide on. There's plenty of solution and where you shouldn't run out.

These grips are great and the kit came with everything needed to regrip some old Spaulding irons that I wanted to use as I learn to play golf. After watching a few YouTube videos, I found it relatively straightforward to install new grips, though removing the 40+ year old grips was a challenge. The solvent works well and smells nice, but the container it is in is useless. The cap doesn't stay on or seal well enough to be useful, though the packaging was good enough that none was spilled during shipping. I've hit maybe 200 balls with my favorite 5 iron after installing the grip, and it doesn't seem to be wearing out, though I do try to keep my hands clean and dry when I play. For the money, these are great to rehab an old set of clubs or get a set up and running that doesn't merit premium grips. The process of regripping really is easy, and after looking at prices to have it done in store make these grips a no-brainer.

Excellent product! Easy to install. One small suggestion here: put enough solvent to lubricate the tape and inside the grip before assembling the grip and the shaft.

The grips are great quality for the price and seem brilliant value on first look. They feel good, look good and do not smell cheap and plasticy like some other cheaper grips. I purchased the mid size grips to replace and regrip some old callaway woods and some irons. With a little bit of white spirit the new grips slipped on with ease. I will definitely be using Champkey grips in the future when gripping my full set.

I need new grips and was undecided what to buy, I’m glad I chose the Champkey grips as they give me confidence in committing to the golf shots

I needed my grips replacing on my golf clubs but when researching them online, they were priced approx £14 per grip. Times that by 13, plus fitting, it soon added up. Saw these on YouTube and their great reviews, so I decided to buy them and fit them Myself (something I'd never done before). They arrived the next day and after seeing a couple of YouTube videos, I replaced each grip, which was extremely easy. They are not the best grips you can buy, but if money is a bit tight and your grips need replacing, you can't go wrong with these. Even if they only last you the season.

At a pound a club why pay a "professional" a tenner plus cost of grips ???? Easy job, give it a go !