DOITOOL 2PCS Sink Faucet Diverter Valve With Aerator and Male Threaded Adapter,Faucet Adapter for Washing Machine Hose Attachment, Faucet Connector for Water Diversion

Nice product worked well for a while but it's starting to shoot water everywhere and not just from the faucet where the water comes out the levers that turn the water on and off and where the hose would connect is just shooting water and there's no way to stop it unless you already maybe Puddy it but that's still not a great solution so I'm having to replace

This adapter worked as intended. I set it up without plumber's tape to see if it worked. It, as expected, leaked but diverted properly. One obvious concern is if you connect a dishwasher hose, it sprays straight out on drainage, sideways instead of down. Easy to redirect with a cup or bowl etc. The problem came when I tried to remove the adapter from the side so I could use plumber's tape to seal it. As pictured, the adapter for the hose screws on to the side of the diverter. But the part it screws onto ALSO screws onto the diverter the SAME direction. So, instead of removing the adapter from the diverter, the entire side assembly came off together. Can't use pliers to grip the small piece or I risk damaging the threading. Rubber band didn't work, rubber gloves didn't work... incredibly frustrating. So far, I have no solution, but will update if I figure it out.

This is very nice. It was my error, but I had to get an adapter, and the attachment to the intake hose is the wrong type for my connector. The connector that came with it is a female, mine is a male. I got it to take the intake attachment that came with this diverter. I just have to make sure it's on. It's very tight and hard to get attached. It was my errors. Once I got everything attached, I've had no additional problems. Just make sure to check your connectors.

The included adapters wouldn't work due to sizes. Luckily I already had the proper adapter. I wish I had spent a little more and gone with a better rated one.

The media could not be loaded.  Basically needed something with a quick connection and also be able to disconnect the hose without getting drenched with water. All you do is turn the water off and bleed the excess pressure out by turning the valve. And that's it. Highly recommend it!

Worked great for a countertop dishwasher but in just under a year the lever came out shooting water everywhere.

It does what it's supposed to. I needed this for my portable washing machine. At first i thought it didnt fit because when the hose was placed on the extended valve the white rim did not got over the ball locks causing the hose to pop off and water gush everywhere if the faucet was on. Then realized all i had to do was give the white piece on the hose a little push until it click locks in place over the balls securing it on the valve. No issue's now.

Easy enough to install. Needed to buy an adapter since I didn't realize this was designed to fit an outside threaded faucet. The diverter body and snap coupling fitting on the side are metal (though definitely not brass) but the little handle and aerator cap are both pretty flimsy plastic. The aerator cap had chips in it and the internal parts (screen, diffuser, etc) were also pretty poorly put together. I replaced that whole bit with a far better quality metal one I picked up at the local hardware store. Then there was the added expense of having to buy the female end of the snap coupling so I could actually connect my portable washer to the faucet. Tried to go cheap but ultimately spent more. It at least does function properly without any leaks (although the side spout really restricts water flow) and it is a convenient little contraption but all the extra effort and expense getting it to work properly really isn't worth it.

When I tried screwing it onto the faucet things seemed to be going ok. Turned the water on and a little spray was coming out, ok, tighten it a bit more and the thing fell apart.Notice the pieces on the right. The piece with the white washer is the part that screws onto the faucet. That ring in front of it is supposed to be just inside that other piece, before the washer. That ring was what kept the whole rig on the left attached.When, tightening the part on the right up, onto the faucet, it forces down on that ring. It was apparently too much for that little ring. It popped out and the whole rig fell out and I got pretty wet.I thought "Ok, let's put that ring back in there". It's a pain but even after I did that this thing was so touchy that any pressure (like when attaching or removing the hose) the whole darn thing would fall apart again.I tried a few times. I give up. It's going back. It's too bad because it's a really nice looking piece and the water aerator works really nice. That's why I kept trying to get it all to work. But I'm done.

was a godsend at first as it allowed to me have both the portable dishwasher and the sink available instantaneously, but 2 months after installation, the rubber seal around the switch valve gave way and started leaking. I have messaged the seller- iI they respond I will add an edit.

This item was good it just was not the right piece I needed

Pas le bon produit pour moi. Cause que l'embout clipper vas pas sur ma machine a laver a cause du gros seal

It broke