MuHize Fuse Taps - 4 Types 12 Pack Add-A-Circuit Adapters for Micro2/Mini/ATC/ATS Low Profile Fuses, Easy Plug & Play Installation for Dash Cams, LED Lights (12V Car/Truck)

excellent fuse taps

Worked great, great price with fast shipping.

Worked well. Inserted the one fuse tap that I acutally needed... not sure what to do with the rest but this kit was the same price as just the ONE I needed so can't complain. One thing I would mention is that it's a bit confusing which fuse slot to use for the attached device vs. the internal one since there is no label or instructions. I had to use a volt meter to figure out how it was wired internally. Once that was established no problems though other than the fuses fit REALLY tight. Guess that's better than the alternative :)

These can be installed either way, but will only work properly when installed in one direction, depending on how the fuse box is setup in your car. The reason for this is because the terminals on this fuse tap that are on the opposite side of where the wire sticks out are both wired together, but the terminals on the same side of the wire are independent that way you can have two different "circuits" that are each protected by their own fuse - the original one plus the one you are adding on. In my vehicle, the power source is on the right side fuse terminal, and the "load" side is the left side terminal. If I install this where the fuses are pointing up, and the wire is sticking out the left side, everything works as intended, but if I flip this around where the fuses are pointing downward and the wire sticks out of the right side, that makes the load side of both circuits connected in parallel instead of the source side, and makes it to where the fuses in both positions power the addon circuit that is connected to the wire, if the lower fuse (the one closest to where it plugs into the fuse box) blows or is not inserted, it will not only cause the original circuit to stop working, but the one you added on as well, in this case, the addon circuit will only work if fuses are installed in both positions and neither are blown if this is plugged in backwards. There are no instructions as to which way it is supposed to go, you just have to verify yourself to see which side of your fuse terminals are the "load" side and which side of your fuse terminals are the "source" side using a multimeter and install this where the side with the wire sticking out is on the load side. Hope this makes sense.

I recently purchased a radiator cooling fan and was having a hard time wiring it to my truck. The easiest yet most unsafe way to wire was to connect it directly to the fuse block. This was not an option for me because I did not want a fire to break out. Using the add-a-circuit adapter makes wiring very easy. What I like is that it comes with a slot for a fuse. There's no need to cut/splice your wires into an existing wire, or to add an extra wire for a fuse. This way, you plug into the fuse box, with a fuse, and everything is safe. I plugged in a way that the fan turns on when the truck is on, and turns off when the truck is off. Very easy. Very effective and safe.

Nice having a variety. Used 2 to install a dash cam. Fit well and worked great. Crimp worked fine for 16g wire

Works good

I bought these fuse adapters to install a dash cam on a 2016 honda accord. This kit comes with 4 different fuse types. My car uses the low profile mini fuses which are recessed or sunken into the fuse ports of the car. The way these devices work is, you remove an existing fuse and then you insert this into the fuse port where you removed the fuse. The existing fuse and the new fuse goes into the slots on the adapter. Well since the fuses are recessed and this adapter is bulky it is stopped from being completely inserted into the port by other surrounding fuses and it doesn't make contact and is loose in the port. For my dash cam I needed constant power and switched power. The constant power is for parking mode to work. For constant power I found one empty fuse port with no surrounding fuses and I installed a low profile fuse there, it went all the way in, was snug and made perfect contact. For switched power I had to use a mini fuse instead of the low profile fuse because the mini fuse had longer blades and they are about the same dimensions as a low profile fuse. The longer blades allows the fuse to go into the port and make contact without being stopped by surrounding fuses. The provided fuses are cheap and fall apart with a little pressure. Would not buy again for my car but it may work fine for other people.

Está exelente lo rápido de conectar mis accesorios con este producto

The holders are overly tight and fitment seems a bit off. It works, but I broke many fuses trying to force it in. We are a professional shop and our usual suppliers are out of stock, we we gave these ones a try. Not the best but not bad for the price.

Lucky they sold these power takeoffs in sets of 3, and the 3 main sizes.

Llego antes de tiempo y el producto es de buena calidad. Vale mucho la pena y el precio es muy bueno.

Producto de buena calidad, con el logré instalar de manera profesional el remoto de una fuente de poder para un equipo de audio. Muy recomendable