Studio Designs Sew Ready Folding Craft/Cutting Standing Table - 58.75" W x 36.5" D x 36.5" H - Sewing Table - Silver/White

This table is amazing! Sturdy, easy to assemble via 'picture' instructions, well constructed. I chose the adjustable height, however, probably didn't need that upcharge option. I have the height set at 35" which is perfect for my 5'9" height. 34"-36" height would be just fine as well. I bought 2 plastic baskets at Dollar Tree to place in the metal baskets, which is convenient for me to be able to take the whole contents out at once. Love the simple but durable design, can drop the sides and place against the wall and still have space to use room as guest bedroom.

This cutting table is well built, good quality, and easy to assemble. The top is solid heavy plastic, not a cheap laminate. Pieces fit together well and the directions are clear. It is very heavy, you may want to open the box and move it in pieces. Be sure to measure the height you want first, then attach the casters to the side legs, measure, and add 1/2" for the top, adjust. I left 5 holes at the bottom of the adjustable bars and this gave me a height of 36.75", perfect for me (I am 5"5" with long legs). You would have to tip the table over on its side to adjust the height after it is put together. I would suggest using an electric screwdriver or other power tool for putting in the 48 screws on the hinges, be careful, they strip easily. Other bolts were easy to attach and tighten with the provided Allen wrench. Be sure the 3 top pieces are aligned properly before attaching the hinges. It took me 2 leisurely hours to put it together, I only needed a little help at the last step when turning it upright. The plastic card holding all the screws and bolts had a typo making it confusing at first to figure out which bolts to use in several cases, but you can figure it out by the number of pieces provided. Two wrenches were provided with 4 different sized openings, only one end was needed, nothing fit the other ends. I had to use my own pliers to tighten the caster nuts. The markings on the table are accurate, I checked with one of my quilting rulers. There would be a slight inaccuracy if measuring across the hinged areas vertically. I found that my hinges did not line up exactly and therefore the lines going across them are not exactly continuous, off by about 1/32". The only negative is that since the support for the leaves is only in the middle, when you press down on the corner area it moves down a little. I would not put anything heavy on it, especially a large sewing machine. I had a cheaper version of this I got at Joann Fab, this one is so much better, although neither one is as sturdy as a four legged table (but those don't fold away as easily of course).

This is a great table. I like that it folds and I can roll it out of the way when not in use. The adjustable height makes it more comfortable to cut fabric. It also comes in handy for wrapping gifts! For anyone that finds the lines are not lined up after assembly, just loosen the screws on one side of the hinges and line it up and re-tighten. It’s not that difficult!

I liked the table so much, I bought a second, however, this one had grid lines. Putting it together is easy, may need a second person, becomes heavier as you build and it need to stand up right after it is built on the floor. A LOT of screws to add. Great sewing table and the fold down sides makes it super easy to store away. The adjustable legs are also a perk to lower for working with children or to raise for standing. The only disappointment was the pre-drilled screw holes under the table, did not align to grid lines on top of the table and no matter how hard we tried or how many people we added to project to hold, the lines remained uneven, we could not add new holes because they would have been too close to preexisting. At first, it was an eyesore to see uneven lines but now, with all the fabric on top I do not notice. I would still buy again and recommend, just without grid lines.

I was hesitant about this table, because the reviews often had damaged parts. I pulled the trigger anyways because I couldn't find anything that looked quite as nice. I'm so happy I did - this table is AMAZING. It was super easy to put together by myself, parts were well and clearly labeled. It's so compact. The lines match up on all the table parts. It seems sturdy, despite there just being the one angled part holding the wings open. The wheels lock. And it's SO compact and folds right up when I don't need it! I LOVE it. It's absolutely perfect. I did use a small drill to screw in the 48 hinge screws because I wasn't about to do that with a screwdriver, but if you go that route be careful, you can overdo it. It also doesn't come with extra hardware so don't lose any.

I bought this table to use in my quilting room. I don't have much space, so I like that it folds up when not in use (whenever that will be). The measurements on top which are in inches on one side and centimeters on the other, are very handy for a quick measure. The baskets and the shelf are great! I can only use one basket, since the table is up against a wall. If you have more space, you can pull the table out so you can use both baskets. I like the shelf for storing my accuquilt cubes and cutting mats. My husband and I put the table together and it took 2 - 3 hours. Everything was clearly marked and the washers, screws, etc. were on a card so that it was easy to pick out which one was needed. I also like the adjustability of the height. When we put it together I was able to choose the best height for me. Now I don't get backaches when cutting out fabric. The table is also very sturdy. It doesn't seem to have the wobbly problems that other tables have. This has been a wonderful purchase!

Very nice, sturdy table which will allow me to lower the cutting table to the height of my sewing machine when making large quilts

In three hours today, I unboxed the table components, read the instructions, and assembled the table. I'm really impressed with the easily readable detail in the instructions and the numbering of every part number that also corresponds to the instructions. Instructions are primarily diagrams, with just a little text. A lot of text is not needed. Anyone with little to no ability to assemble something, or anyone who doesn't generally do well following instructions, will find the instructions very easy to follow. I've never seen instructions so well done and easy to follow. As for the table itself, it appears to be very well built. The engineered parts and inserts that the screws and bolts thread into were all perfectly placed and I had no trouble lining up or inserting anything. Everything but the underside of the tabletop had metal components to screw or bolt into. The underside of the tabletop had partially pre-drilled holes to attach the hinges with screws. These screwed into the wood. A few of the holes were only slightly misaligned, but I had no issues firmly attaching the hinges. I really like that the height can be adjusted. To do so, the table would have to be laid on its side so that the knobs can be unscrewed (all metal into metal!) and the legs adjusted. When assembling, I would recommend determining the height you want when first inserting the legs--it'll be easier to do at that time than waiting until the whole table is assembled, since in the early stage you'll only be dealing with a light frame vs. a fully assembled, heavy table. Fortunately, I had the forethought to do that and it made adjusting the legs much easier. The only thing needed for tools that were not provided is a Phillips screwdriver and an Allen key that's slightly larger than the provided one. That Allen key is for the last of the two bolts that go into the bottom of the table, but if you don't have one, finger tightening it will probably be fine since it's just a stopper for the swing-out support leg for the side panel. I would also recommend using a regular/better quality (thicker) open-end wrench, since the one that's provided is very thin and a little harder to position and hold in place. The instructions say to not use power tools. The main tool used for the majority of assembly is the Allen key. I don't even know if there is a power tool for that. I certainly don't have one. But when I did get to screwing in all those 48 screws into the 8 hinges with the Phillips, I manually inserted the screws halfway, and used my low-power screwdriver to screw them most of the rest of the way--I did so gently and slowly so as to not damage the hole since it's wood. It was just too much for me at that point to do all that by hand. I'm a woman in my early 70s with a bad back, so by the end of the 3 hours, I had to either take a long break and finish later or use some power! If you do use a power tool, don't use an impact wrench, since that's likely to cause damage. I screwed them in slowly and gently until nearly completely in, then hand-tightened all the screws the rest of the way. TIP #1: When you've finished installing the hinges on the tabletop and are ready to lift the frame onto the tabletop, do something like I did to make that easier and to keep the side panel support leg from swinging outward. I used velcro strips to strap both side panel legs to each adjacent support leg of the main frame (center frame). You could use anything like cording, strong tape, etc. Just something that will keep the leg in place as you invert the frame onto the tabletop which is bottom-side up on the floor. Then after you attach the tabletop, you'll also be able to turn the unit right side up without the side panels swinging outward and banging into something or damaging the hinges from force of gravity. TIP #2: After completing assembly, I noticed that I had the tabletop panels installed incorrectly. One side is metric and one is imperial. Since I was working upside down, with the printed side down, I didn't realize there were two types of measurements, so now I have metric in the middle of the imperial, and vice versa! And I can't correct it because the hinge screws are inserted into wood, and I don't think I'd get a tight fit if I removed and reinstalled them. So that's one flaw in the instructions--if they would have cautioned about that, I'd have gotten it right. So, watch for that! I've attached a few photos from the instructions, hardware, and frame parts so you can see how they are numbered and how easy it'll be to follow the instructions where each part to be installed is numbered on each page. Shipping ripped out a large chunk at the corner of the exterior cardboard box, but the table was so well packaged that there was no damage. Pic attached. I have lots of plans for this table, and really like how when it's not in use it can be folded so that it takes up very little room. I highly recommend this well designed, engineered, and constructed table!