A1893 A1954 Screen Replacement Kit for iPad 6 (6th Gen) Digitizer Touch Glass 6th Generation 9.7 inch 2018, with Home Button Full Repair Tools [Without LCD]

Worked well for replacing my son’s iPad screen that was cracked. Looked up YouTube video for instructions.

Installation is very simple. The most difficult part is to pry the old glass off. It took me over half an hour, and I had to shatter the old glass totally to remove it. I bought this one with the home button to be safe. After I finish, I realized that I should hv bought the ones without it. No wonder most people are selling them with no home button. I resused the old one, so that my credentials are kept. It's very easy to get off and stick to the new one. In general, you can follow the instructions in the package. One tricky part is the longest flat wire that goes from glass to the pad. It's glued on by a tiny tape. All other connectors are clipped on, so you can pry them open with the pastic pryer came in the kit, but for this one, u need to peel off the tape, and pull it out. prying will bend the connectors. After you are done, before you glue the glass back to make it permanant, it is suggested that you test if it works. The LCD may not light up. Don't panic, the pad needs to be hard restarted. push and hold both power and home button for 10 sec, and it'll restart to light the LCD up. Aviold my pitfalls listed above, and good luck, u may finish in a hour.

This replacement screen was a nightmare to install. Firstly, the printed directions were absolutely horrible. They were vague at best. I had to watch a video from a youtuber to get it installed properly. There was broken glass everywhere and the suction cup was absolutely useless. Also, the tools to separate the broken glass from the chassis did not work at all. I used a razor blade to separate the broken screen from the ipad. I made sure not to cut any cables as shown in the youtube video I watched, which was excellent by the way. Unfortunately, I lost home functionality mainly due to my inexperience as I broke the zif connector for the home button cable, but also because the printed directions didn't explain AT ALL which way the zif connector was hinged. Anyway, I could live with that if everything else worked fine. The adhesive tape does NOT hold. I didn't try the included glue because there were NO instructions on how to install it and I didn't want to risk getting glue everywhere. The worst part is this, there is a horizontal band across my ipad that no longer registers touch input. I included a video showing this. This is not acceptable! Do NOT buy this! You'd be better off paying a pro to replace a broken screen because at least you get a warranty for a couple of months!

Great replacement. Can't believe all the tools it came with. So much. A lot of tape also. I didn't even use any that wasn't pre-applied, so I have the whole roll for future repairs. I am extremely pleased. My expectations for such an inexpensive replacement were low, but they were blown out of the water. It's not an easy repair, since the Apple applied glue is so sticky, but with patience and maybe a little acetone, it comes off in the end.

Okay first of, me and my husband joined hands in making this thing works. All the process and warnings are available on youtube and I highly suggest you watch it if you’re inexperienced in putting one. Touch ID won’t work if you’re going to use the one that came in the package BUT there’s a way to reuse your old button if you’re really wanting to still have the touch id feature. Just an FYI we broke ours on the process hahaha! I suggest don’t remove anything on the pre-installed one not until you successfully remove the whole old button on it. Going down to the final attachment, it took us hours to get the screen works perfectly. Before you get all the sticky screen down you need to test the touch screen responses first. We had to keep reattaching the connection from the touch screen and it was really very easy to be disconnected. In the end, someone has to hold the screen and making sure it won’t get nudge and risking detaching it the slightest. So for those who had those problems with it, it is because it gotten disconnected from the inside not because they broke the ribbon or because the screen is broken. It works perfectly fine now after a grueling 4hours of work.

Installation of this product is super easy, the hard part is dissembling and removing the old screen. The tools included were somewhat helpful, but didn’t last long. I guess you get what you pay for. After installing this, I lost complete functionality of the original or new home button. The screen clarity is not the greatest. Touch screen works completely as it should. The adhesive is a joke and does nothing. If you just want to fix your screen for cheap and have it work, yes… this is a good option. If you want to spend more to have a better quality screen by all means do it. If you are prone to shattering the screen then this might also be for you.

Unfortunately screen came damaged. Seller refunded. Other then damaged the screen looked to be well made.

Very responsible seller. Had a problem at first with the first screen that was shipped, but JPUNG refunded promptly and we re-ordered

Tyvärr var flex kabel sönder så skärm funkade ej.

Mon iPad avais la vitre en miette Maintenant il est comme neuf super produit

Very impressed with this digitizer. Includes various tools to help you with fitting. The quality is very good. A very good product at a great price.

Funktioniert optimal, der kleber ist stark und sas Display hält perfekt. Es funktioniert wie es soll.

Il vetro è di qualità superiore e nel kit è compreso anche il tasto home che ne facilita il montaggio. Bravi bravi bravi PS consiglio un tutorial nello spiegare meglio l’installazione..