Timbertech Upgraded Airbrush Single-Piston Oil-free Mini Compressor ABPST08 with Cooling Fan, 3L Tank, Regulator, Moisture trap for Hobby, Body Tattoo, Model Painting, Automotive Graphic, Make-up

This is a great compressor, it's small, quiet and functions flawlessly. The included regulator and moisture trap make this a great value. Air is consistent and dry, it holds my working pressure (about 20psi for airbrushing) perfectly. It's a nice design, it the tank seems to be of good quality, think walls and good welds. The feet keep the compressor from moving while in operation. It's simple to use and meets all expectations. Some have complained about rust in the tank but mine didn't have that problem. Also the hose fitting seems to be an issue for some but I just bought a Grex airbrush hose kit and it's got the proper fitting for this and my Badger Patriot 105 airbrush.

I Took the image about 5 feet away and also noise in that small space I created would be amplified so take that into account, but massive diffrence between this compressor and a pancake one used for general use, granted pancake one once full last a while but when time comes to recharge it, its annoying, the little one even though it does turn on more more frequently the noise does not bother me at all, in a weird way its almost like a white noise. You could be by me and hear me talk easily my voice is louder then the little compressor, talking normally. I saw more expensive ones woth a tank onit and decided to go for this one and honestly no regrets performs great for my hobby. It does not come with a hose but if you ever bought a airbrush kit that comes with the hose it fits on there, I did how ever buy a quick disconnect kit so the hose can stay on the compressor, makes it way more convenient. I dont airbrush every day or for long periods of time so not sure how it performs under long usage and heavy load. I saw some comments about it getting hot, I have not had that issue but if I do ill just put a fan or something by it. Still worth it for this great price point. Overall great design and doesn't leak, no overheating issue, works good very happy.

Wisper quiet🤫 Runs smooth with adjustable pressure control. Compact and sturdy. Definitely a quality product and affordable.

The next day I received that compressor it developed a leak right around the water trap transparent bulb. I emailed the seller Airgoo. They apologized but couldn’t replace the unit because they run out of stack. But they offered $20 for the air regulator replacement. It’s better than nothing. I tried to fix with epoxy, but this didn’t work at all and I ordered a replacement air regulator from the Amazon, and the tread sealer, of course all together cost me more than the $20. And I was not so happy about that. Then 2 weeks later I’ve got another email from the customer service of the Airgoo asking me if the compressor is working. I replied that it’s working, but I spent more than $20 on replacement parts. For my big and pleasant surprise they apologized and offered me a compressor with airbrush set without sending back my unit. Of course, I accepted such grateful offer. Who wouldn’t? Now back to the compressor. It’s very good. Since the replacement of the faulty air regulator/water trap it’s working well, holds the pressure, not getting hot, temperature of the motor and the compressor head got at about 40 C or 104 F after 30-40 on and off cycling. Noise level is relatively low. I measured the sound level with an app on my phone from the distance of about 40 cm/ 16 inches. The noise level went from ambient level of 38-40dB when compressor is off to 60-65db when it’s on. Not so loud. One more thing. No airbrush holder. I had to buy one. Easy to install, unscrew the big red nut, put the holder on, screw the red nut back. Update 07/21/2020. I received the promised set of compressor and airbrush. It was a dirty used airbrush. The compressor also seems to be used one. The handle is covered with some white substances like a dry paint, on the body of the compressor there are paint splashes. This is not the way you take care of your customer Airgoo Timbertech. Very disappointed. I was to generous given 5 stars at first. Sorry, but this is one star guys.

This is a great little compressor. Timber tech. I have had it now about 6 months no issues. It works great and love the 3 liter tank. Holds more than enough air. I build models so I use it alot. Always performs great. Real quite , great for apartments which I live in. Want a compressor that will always work when needed this is it. I highly recommend it. It doesn’t move around or anything

This seems to be a very nice airbrush compressor. It’s well finished, runs quietly enough to have right next to you and delivers enough air volume for an airbrush. It cycles on and off to keep the pressure up. The on/off switch is lighted, so you can see at a glance whether it’s energized. The built-in carry handle is nice, too. My one objection is the pressure gauge, which is ill-sized for the purpose. The gauge and its markings are very small and the pressure range is much higher than needed, which makes setting accurate output pressures difficult. I replaced the small 0-100 PSI gauge with a larger 0-60 PSI gauge, which is much easier to read and set. The regulator seems to have a 1/8” NPT (National Pipe Taper) thread size. The gauge I got is ¼” NPT, so it needed an adaptor to fit 1/8”. Unfortunately, the new gauge is glycerin-filled and has an air bubble in the dial, which is annoying, but at least now it is easy to read and pressures in the 10-15 PSI range are easy to set.

This is a great compressor for the price. I purchase it for my first airbrush and have not been disappointed. See the tank allows for you to have a mostly quiet paint session w out being bothered too much. Even tho the decibel level is advertised as being low I find it a tad too loud for my taste. That being said it is quiet enough for me to use in my paint room w the door open and not have it heard in the living room when my wife is watching tv. After you get in the groove you won’t even notice the noise and it’ll be part of the background. It passes the wife test and I haven’t woken her up once during my late night paint sessions. I did have to go buy a quick release adapter for the hose but that’s whatever. A truly great buy for my airbrush painting.

New to airbrushing and so far no complaints! Nice and quiet, easy to operate!

Me encanta. Funciona muy bien y realmente arroja el aire de forma precisa, limpia y constante, incluso con baja PSI lo cual lo hace perfecto para poder pintar detalles muy finos haciendo que cualquier aerografo, incluso los genéricos chinos, atomicen la pintura de forma impecable. El tanque es pequeño pero es más que suficiente para poder pintar por unos minutos sin el ruido del compresor. En cuestión de ruido es genial ya que no es molesto para nada haciéndolo útil para usarlo incluso de noche. El único detalle es que tiende a calentarse mucho por lo tanto me encuentro apagandolo constantemente para que pueda enfriarse, sin embargo, esto es normal en todos los compresores compactos como este. Así que si lo que buscas es un compresor de calidad, compacto y a buen precio, esta será tu mejor opción. ¡Lo recomiendo totalmente!

Happy with this compressor so far. I use it for airbrushing hobby models with my Paasche airbrush and a couple of no-name ones, and it’s been running great. It’s reasonably quiet while running — not silent, but quiet enough. Because it has a tank, it doesn’t run constantly; it cycles on and off smoothly and holds pressure well. Build quality feels solid, and the built-in cooling fan helps keep the motor from getting too warm during longer sessions. One thing to note: depending on your airbrush brand, you might need an adapter for the hose connection (the compressor uses a standard 1/8" BSP thread). Overall, no complaints at all. Great value for the price and perfect for hobby airbrushing, models, crafts, and similar projects.

Been using this for two years. It's great, I've never felt the need to upgrade my compressor to one of the insanely expensive big brand name ones. No leaks, no rust, it's not loud at all IMO. You can easily have a normal conversation next to it while it's filling up the tank. Maintains pressure fine. I just paint minis so this thing has more than enough PSI for that - I can't imagine you'd ever need to go above 40 for that application. I would say this isn't even just an "entry level" compressor. You really can just keep using it. I'm currently using it with some of the highest end mini-focused airbrushes on the market (the Iwata eclipse and the H&S Infinity 2024) and it's been no problem at all.

Es un buen producto, equilibrio perfecto calidad-precio. Lo utilizo para pintar modelos a escala y maquetas, me funciona perfecto con el aerógrafo, tiene buena presión a la salida y es regulable. En mi caso el tanque de 3 lt esta bien, para trabajos grandes puede que sea poco, ya que el compresor arrancara muy seguido, el nivel de ruido es bastante tolerable.

What a great little air compressor, it is whisper quiet, reliable, and excellent value for the money. The compact size, built-in carry handle, and being oil-less means it's virtually a maintenance-free design. Setup is intuitive and I couldn't be happier with this purchase. I highly recommend to anyone needing a compact and quality air compressor for air brushing or in my case a CNC laser air assist system buy this one. If I could give this more then five stars I would.