Best brose Adjustable Racing Steering wheel Stand Shifter Mount Fit for Logitech G25, G27, G29, G920 Racing Simulator Cockpit Video Game Accessories, Shifter Wheel Pedals NOT Included

This is my first racing stand so I have nothing to compare it to, but so far it’s great. After getting it assembled it’s a lot more sturdy and stable than I was expecting honestly. Putting it together, while not difficult per se, was harder than it should have been due to garbage instructions. Fortunately it’s relatively straight forward to assemble if you just look at the picture of the finished product. Took approximately 20 minutes from start to finish, not counting screwing on the steering wheel, pedals, or shifter and doing a little cable management with the included Velcro straps. The stand feels like it should easily hold up over time. Its got good weight to it, and doesn’t budge while using it. I’m using a g920 wheel, pedal, and shifter on the stand which all mounted no problem. We’ll see how the stand does in the long run as between my two teenage sons and I, it’s going to be used daily I’m sure. Overall I’d say this is a reasonably priced, sturdy stand and for the entry level user. Two thumbs up.

I ordered this stand for a wheel that isn't EXACTLY compatible, but it's not NOT compatible. Anywho, this stand makes a world of difference. Most games in my library, going all the way back to the PS2 are racing/drifting games/sims.. I've normally had a wheel, but I used to just attach them to a TV dinner table. This is worlds apart. It's sturdy and more ergonomically advantageous. My only gripe is that the instructions are absolute DOG ISH!!! I mean horrible. It's like if a 2year-old baby, addicted to heroin, tried to write detailed engineering instructions for the Hubble Telescope....or.... like if you ever bought anything from Ikea. Suffice it to say they're bad. Really bad. However, the item, itself, is stellar and anybody who's ever played with Legos could put it together. With their BOX OF SCRAPS, it took me under an hour.

Honestly good item, I have a t248 with shifter and I was able to get the wheel and pedals to fit on the brackets, I just had to flip the wheel plate for the screw for the wheel to fit, in terms of the t248 shifter I couldn’t get that to attach to the mount so I had to use the normal clamp, a bolt and nut was missing and the overall base is a little prone to tilting forward if it’s kept at the lower angle, stability wise it’s not bad but the rubber may not stop it completely, I’d give it a 3.5 but I’ll round up since it’s not bad for the price and it gets the job done, overall decent product.

The stand is very sturdy and good quality. The kit comes with everything you will need. The instructions are mot as bad as you may expect. They do give you all the information you need to assemble it, however it’s just not too intuitive. For example it will list a screw size to use on a particular part. But the only indication of the different sizes are in the inventory list in the instructions. It only took me about 15 minutes to assemble, and most of that time was reading the instructions.

After reading reviews I made the mistake of asking myself "how hard could it really be to put together." Fast forward 3 days later and I open a generic cardboard box with several pieces loosely packed with a ziplock bag of nuts, bolts, and screws. All topped with a single piece of paper with very simple assembly instructions and horrible quality pictures. During assembly I contemplated returning this purchase several times, but I forged on. After figuring out what goes where and what size bolts to use I started assembly and quickly found more issues. Holes were not properly lined up resulting in needing to machine the pieces to be able to fit, the "telescopic" piece barely fit in the hole and does not freely slide at to adjust height, and the tray for the racing wheel seems too small causing you to need to apply a decent amount of torque to get them to pinch together enough to actually assemble it. With all that said, once it was assembled and set to my desired height it seems great. I don't recommend it though due to the difficulty in setup and the fact that it required me to have to modify it to even get it assembled.

This stand is great value for the money. Reasonably solid and is well thought out in terms of holes and adjustability. A couple notes: - Logitech G29 wheel and pedals align perfectly with the existing pre-drilled holes. I highly recommend buying handle screws to more easily secure them in place. Search for "M6 Bolt Knob for Logitech" [[ASIN:B0CM8Z4S1D]] - Caster wheels make this stand much easier to move around. Just unscrew the existing footpads and use lockable wheels so you can roll into place and then lock the wheels for stability. The screw holes are M8-1.25. Search for "1.5 Inch Swivel Caster Wheels Set of 4 Locking Metric M8-1.25 Threaded stem TPR" [[ASIN:B0B521D3QB]]

Mine arrived with NO instructions and a pile of metal parts and a bag of screws. It took about an hour to assemble and ultimately it's fine once assembled. I recommend laying all the pieces out and then laying the screws and bolts out near each spot before screwing them together. Also, zoom in on the Amazon product photos and you can get an overall good idea of what goes where. Once assembled, it seems very sturdy and will be a very nice addition to my racing games. My G920 wheel, pedals and shifter hard mounted easily to the driving frame with screws that were included. The telescoping frame makes it very easy to adjust wheel height. The wheel attachment point tips forward or backward and so does the pedal tray. So everything should be easily customizable for *most* people. It is VERY solid and feels heavy and does not slip. In fact, on my low pile carpet it's actually hard to move away when I'm done playing. This isn't a full metal cockpit experience but for the price point I'm pleased.

Not sure why so many people are having trouble putting this together. The instructions are just enough to get you through it. Only thing is it could be a little sturdier, but for what it is, I think it does a great job.

Highly recommend. Solid as! Just what you want when gaming.

Really happy with purchase. Very sturdy. Lots of adjustments. Easy to assemble but the instructions are not helpful at all!! You have 4 washers, but no where in the instructions are you instructed to install them, and they don't appear in any of the pictures. But the product is IMPRESSIVE!!! Would recommend for a cheap first buy. Worth your money!

Very good product, I like it and it helps simplify my wheel setup. Cons are that there are metal bits that come out and that can scratch you (better to sand it off). The bottom part frame was bent so I had to bend it back (not bent because of shipping). The manuel was a bit tuff to understand but ok

Support pour kit G29 avec support à sifter. Solide bien que les instructions de montage soient pas évidentes s’assemble quand même bien. Boulons fournis pour volant, pédales et shifter.

Most of my grievances with this product is to do with the instruction manual. Some parts are labeled differently on the photo of parts than it is when it comes to assembling. Photos are blurry and dark and do not give a good representation of where everything is supposed to fit together. Parts are machined poorly, the "table" portion does not fit smooth with the arm supports (arms have to bend inwards for it to bolt together), and the clutch pad arm requires washers (despite the instruction never mentioning it) between metal pieces or else it wobbles a lot.