Blue Magic 400 Metal Polish Cream Non-abrasive Tarnish and Oxidation Remover for Chrome, Aluminium, Brass, Copper, Sterling Silver and Stainless Steel, 7 oz., Pack of 1

This metal polish actually works quite well.I bought this to restore the original finish (or as close to original as possible) on our church's commercial kitchen sinks and stainless steel prep and serving tables.I used approximately 1/4 of the medium sized jar for a 10’, three bay sink and drain boards and 40’ of stainless steel tables.It took some time and elbow grease, but the results were great. All of the water and soap stains disappeared and the surfaces were restored to nearly their original #4 grade finish. The luster was greatly enhanced, as well.Liquid spills are much easier to clean up due to the micro silicone coating of the polished surfaces.The key to using this polish most effectively is to continuously work the polish until resistance increases to the point where it feels as though the area is virtually dry. It’s at this point that it will be black in color. And continued rubbing will begin to remove the residue. Then use a microfiber cloth to wipe and buff the area until all residue has been removed.As I mentioned above, elbow grease is a must to achieve optimal results! It’s well worth the effort, as you’ll be very pleased with your effort.I did use a 110v rotary polisher to restore the table surfaces, but I restored the sinks completely by hand. Both methods worked equally well.I highly recommend this metal polish! 😄

Okay first, full disclosure, I am not at all a professional and bought this because I wanted to repair the hardware on some of my purses. I heard from a friend that this is one of the best ones out there. So I found it on Amazon and ordered it prime delivery. It came in and I was actually really excited to see what it can do. It’s a good size tub and it is sealed well. Opening it, you will notice it is more like a thick cream, similar to maybe a thick moisturizer. Instruction has follows, mix well, rub until black film appears then clean off with a cloth. Okay, great, so I mixed it and honestly had no idea what I was doing. Although I read rub, I just rubbed on a small layer and just sat there. No black film and i waited and waited. Nothing was happening so therefor I went ahead and wiped it clean and put the cap back on and don’t think twice about returning it - for the price it was fine for me to take the loss.Well this evening, I decided too give it another shot. Opened the bad boy up, mixed, and then put in some gloves and tried to actually rub it in, as the directions say too. Well what do you know, black started appearing in my gloves! What do you know, I know how to read and follow instructions 🤣. After noticing the black residue I went ahead and wiped it clean, and OH MY LANTA! This thing restored my vintage bags zipper. Who would’ve thought!?Don’t believe my words, see for your self in my video and photos!Solid amount of polish for the price you pay, it does the job (just be sure you read and follow instructions, haha!), and lastly a little goes a long way! So there for you are getting so much out of this!Highly recommend!!

Yes, there are no miracles. A miracle would be to apply polish to heavily oxidized aluminum, work it for a while with an angle buffer, and have it come out with a mirror finish. There is nothing - NOTHING - that will do that. Nor is there anything you can spray on that will remove heavily oxidation. All polishes are work.I'm redoing a 1953 Airstream that was probably never polished and spent the last 22 years sitting in the sun and weather on a farm. (There was a tree growing through the tongue.) It's overall heavily oxidized. The surface feels like fine sandpaper. Now, these vintage Airstreams were made with all-clad aluminum that has a thin surface layer of soft metal to take that true mirror finish you don't see on new ones. You can indeed return it to that state, but this polish won't do that. No polish alone will do that. That requires many steps of abrasives to remove scratches and several steps of different polishes to bring back the shine. That's more than I want to do, so I determined to do the best a polish could do. This is the one I chose.Being a polish, it can't remove scratched. Nor an it or any other polish remove all the oxidation in one pass. It takes multiple applications, wiping away black oxide and buffing after each application. If your aluminum isn't too heavily oxidized, meaning it's clouded but without visible nodules of oxidation, you can get a pretty nice finish with two or three applications. Heavy oxidation will take three, four, or more. And that's with an angle grinder type polisher, and running through a fair number of wool applicators. You don't want to try to do it all in one pass, because you'll build up so much black oxide that it will hard to remove. It's impressive enough that you actually can get through heavy oxidation with a polish.You will get filthy. You can just about throw away your clothes when the project's done. And you'll need a LOT or cotton polishing rags. (We bought them by the pound from the Goodwill store where they dump their excess by the pound.) You'll use one to wipe down the oxide and another to buff it up before you finish it with your orbital buffer. The result will, if it's old, still show its age, but the shine can be good enough to read a newspaper's reflection. I tried other polishes. None that I tried did as well as this one.I am about one-third through the project, an 18-foot aluminum travel trailer. I expect to run through the entire 72 ounce jar and then some, but I think I can do the past pass with some of the other polishes I tried first. But I understand now why they get $3000 to polish these things to a mirror finish.Needless to say, if you just want to polish a newish aluminum object that is only a little dulled, the results will be stunning. If you're doing something that's just mildly oxidized, you can get a very nice finish with a reasonable investment of sweat.So, five stars for doing all a polish can do, better than most.

Great item

My husband used this polish for just about everything, chrome, or any kind of metal. He has used this for years on our antique car chrome to steel, works perfectly. Great value for the money and a perfect size jar. Highly recommend . Even used it for the stainless steel kitchen sink!

Haven't used it on metal yet, but I've no doubt it will do what it is supposed to do. I actually tested it on some headlight lenses out of curiosity and wow.. Worked out pretty nice. Not AS good as a sand/polish/clear, but impressive.

Just love this product. Cleans so well.

Great product, but packaging/container needs big time improvement.Bought giant size container which arrived with a crack in it. The slippery Escaped substance inside caused it slip out of my hands and onto my kitchen floor. The result was blue mess, not blue magic. Because the container's crack busted wide open (See Pictures), and i could not find a suitable container, i placed it under the bathroom sink in plastic bags. This morning I went to grab it from under the sink and the top came off because the container completely buckled. The result was Hours of cleanup and a substantial loss of product. The container from my whey protein is virtually indestructible. I do not understand why they use this flimsy plastic (reason for 3/5 rating). Again, the product is great and works on all sorts of materials; It will produce a mirror shine.

La compre para limpiar unos platillos de bateria musical y hace exactamente lo que esperas, mis platillos quedaron hermosos, el mejor producto que eh usado.

メタルコンパウンドをこの価格でこれだけの量があれば満足です！メッキもツルツルになります。タオルとかで拭くよりもマイクロファイバーで擦ってから拭き取れば最高です！リピ確定ですね！

السلعه ممتازه تم استخدامها

リピート買いです。トラックのアルミやステンレス磨きに使ってます。愛好者です。

Very good product