EOT Wireless 2 Vent + CD

I recently bought a used Rav4 with a cd slot that I don't use. The car is old enough that there is no screen, so no worries about a phone obscuring anything important. The mount works well in the cd slot, especially with the little spacer* that forces the fingers in the slot to open wider. With the included lighter socket charger adapter, the wireless charger provides enough current to run navigation with the screen on and slowly charge the battery at the same time. I love the one touch spring loaded grip/release mechanism - easy to mount and dismount with one hand. *One small issue with the documentation. There is a small rectangular spacer (mentioned above) whose job it is to make the cd slot fingers open wider. This is not discussed at all on the instructions, and it is labeled as a "bracket," which it is not. By opening the fingers wider, the mount is more solid in wider slots, which I found useful, but only after figuring out that was the intent.

I have to say this is the best mount style of all the options out there. I've had the dash/windshield style previously for 3 years, but overtime the heat has either made the suction cup release or even the black 3M sticky for the dash. I don't like the vent mount because it wobbles and I don't like the cup holder mount because mainly you're looking to far away from where you should be, not to mention it takes a cup holder. The CD mount is secure and is at the right line of sight. The only unfortunate thing is that it blocks my screen, which I really only mind the most when I need to use the back up camera. I just simply tilt it up or rotate to horizontal to get a full view when backing up. I previously had a wireless charger style and once again purchased the wireless charger option. This is very convenient to quickly put your phone on the mount and charge without hassling with the wire. The CD mount also conveniently puts the phone near the vents to cool if necessary. I also routed the charging cable with stickies to keep it organized.

I have an old Honda Pilot (2011) so I don't have Bluetooth and was looking for something that could charge while I was using an old school aux cord. I had gotten one of these for my husband's car and liked it so much I decided to get one for myself as well. The problem is, I keep my phone in magnetic phone case because it "sticks" inside a matching phone wallet I love. Well, the magnetic case prevents the mount from charging. It lights up green with the lightening bolt but then immediately stops charging. When I take it out of the case, the charger works fine. It's a pain to keep taking my phone out of the case when I'm in the car but for now I either do that, or just leave it in the case and use my traditional charging cord, which defeats the purpose. I have the vent version and it's just ok on my Pilot. The unit is heavy so it was flopping up and down a lot. I rigged it up with cardboard "shims" and added some stability with a little piece of non-skid rubber I had at my house to keep it steady.

Updated Dec 2025. Phone mount has failed and stopped charging my phone. Requested a replacement over 1 month ago and iOttie appears to be trying to avoid sending a replacement component. Asking me to refile request for replacement even though I filed using iOttie's required process. First the dual charger did not work - now the phone mount doesn't work. Appears to be poor product quality overall. Original Review: Mounted easily in our CD slot and works great. Really like just pushing in place and removing with one hand. Charges fine through my phone hard case. Easy to adjust angle too. Great customer service - the dual charger didn't work but emailed the company and they sent a free replacement right away.

I have the iOttie Easy One Touch Wireless 2 to wirelessly fast charge my Pixel 4 XL phone in my car. It is connected to a vent in my 2015 Honda Civic just off the right side of the steering wheel. There are no obstacles and the power cable doesn't get in the way of anything after I wound up the excess cable and zip tied it. I'll have to see how much I don't like the vent being covered in the summer, but right now it does not seem bad. Getting the phone into the cradle is easy with a little practice, but getting it out requires me to take my time and snake my hand into the right position to squeeze the releases and grab the phone. Again, with a little practice, not too bad. I don't know if they phone is really charging at 10W or not, but it does charge quite well in the cradle. I drove with Maps running and audio playing in the background and the phone easily charged up and stayed 100% charged during my journey. I was a little concerned about using the vent to secure the device, but I think it will be OK, just follow the instructions and don't clamp the vent too hard. The cradle was tilting down the first few days I used it, but I twisted the nut on the back just a bit more and now it is locked in solidly. This was my first phone holder purchase. I'm happy with the purchase although I thought it was somewhat expensive for what it is.

I researched a lot of car wireless charger chargers/holder before deciding to buy the iOttie Easy One Touch. Having it mounted on the now obsolete CD slot is ideal for me, it does not obstruct the front view and looks much better aesthetically. The only gripe I have is that the audio system's power button is slightly harder to reach, lesser so is the hazard switch. But the holder feels really sturdy and the wireless charging is seamless. It is easy to mount a large phone like the Samsung Note 10+, press the two protruding plastic arms on both sides to free the phone. The car charger plugs into the cigarette lighter, there is an extra USB slot on the charger to plug in a standard device. The product was shipped all the way from Kentucky in the US, so it did take some time to arrive, it certainly doesn't seem to have been in vain.

I recently upgraded my phone from a wired to a wireless charging one (a Google one at that) so I needed a wireless cradle for my car. This one seemed to fit the bill, plus I didn't see many (any) out there which supported the Google phones apart from this one, so it was a win-win already. The cost was more than I've ever paid for a cradle, but when it arrived I can honestly say that it's as though nothing has not been well thought out. The packaging was superb - 100%. I've only had this cradle for a couple of weeks, and so I know it's too early to be conclusive, but I felt I really needed to leave a review because a few of the one-star reviews did put me off, and I feel this needs correcting, as far as my own personal experience goes. It is in regards to the connection method. Having read the one-star reviews and put off by the possibility that the cradle wouldn't stay put when connected to a vent slat, I chose to use the CD-Holder instead. Whilst that worked perfectly, in my case the phone then blocked most of my navigation screen (which also is a rear view camera) and so I wasn't too happy about that. So I tried the vent holder (my previous cradles were vent holder types) and was again, blown away.... DO NOT BELIEVE all the one star reviews claiming the vent holder isn't secure. In my case, I cannot believe how SOLID the unit is when held using the vent holder. My advice is to make sure you push the vent-holder ALL THE WAY until it cannot go any more. And do that VERY, VERY SLOWLY because the vent holder tongs are extremely tight, and there's hardly any gap between, so do it very slowly so that you don't put too much sudden force onto your vent slat. As I say, I now have the very best cradle I've ever had, it holds my phone 100% and does not move or vibrate AT ALL during driving. My only complaint about the device is that the USB connector cannot go fully into the unit, it goes approximately 3/4s of the way in, so perhaps a bit of a manufacturing fault. Oh yes, and the charging light is a bit superfluous as you cannot see it when you have a phone on the stand and the phone obscures the light! Still, 10/10!

Tot op heden nog steeds ok, 1 jaar in gebruik, maar 3 sterren omdat er zoals bij de meeste van deze dingen wordt aangegeven dat dit perfect te bevestigen is. Een mercedes C is alvast een klinklare ramp om iets dgl. te plaatsen. Er is gewoon geen plek. Wellicht beter review over de auto dan over dit item, maar moraal van het verhaal, kijk eerst goed waar je het ding kan bevestigen. Bij de mercedes zijn de luchtroosters met horizontale lammelen, dat zorgt ervoor dat de ganse zwik door het gewicht volledig naar onder draait. Wellicht een pak beter met verticale lamellen.

Hallo zusammen, nach dem ich mir heute fast 1Std den Kopf zerbrochen habe, warum das iOttie bei meinem Pixel 3 (Android 11 up to date März 2021) hin und wieder "schnell" lädt, aber meist nur "langsam" hilft das vielleicht dem ein oder anderen: Bei meinem Auto muss erst das Auto an sein und dann darf erst das Handy in die Ladeschale, dann funktioniert das schnelle laden. Ist das Handy bereits beim Autostart drin wird nur langsam geladen. Warum das so ist... kA.. Lässt sich aber nachstellen.

DVDホルダーにしっかりと固定されてとてもいい感じです。画面を横向きにできるのもよいです。何の問題もないです。