Simply SP-027 Adhesive Spray suitable for paper, wood, textile and plastic, 400 ml

USED IT FOR: Bought it for sticking heavier paper together for the purposes of making birthday & christmas cards, and custom collectible cards. I've used it on different combinations of one-sided 180gsm gloss, 140gsm matte, 180gsm matte and 140gsm linen paper together.PERFORMANCE: In all cases this product performed consistently well. Generally, I tended to apply the two sheets together almost immediately, and the product recommends a 1-3 minute wait, but this didn't seem to have any detrimental effect whatsoever. I found that, for the paper size I was mainly using (A4), it allowed a little wiggle room for repositioning immediately after joining the two sides. However, I would be keen to point out that this would depend on the product quantity used, as well as the paper used.COVERAGE: I didn't take a note of this as I went along. I use it upon occasion and I'm still on my first can.OTHER: Fairly strong smell on application. I used in a small room, and smell tended to dissipate quicker than I expected (I think overnight, with some light initial airing). Only downside I could see is that it's not particularly environmentally-friendly (VOC 83% w/w)TIPS: If using indoors, I'd recommend spraying inside a large cardboard box, and use a stand inside the box that is smaller than what you're spraying (see picture)RESULT: Great product, and I will buy it again when I run out.

Used for an art project, sticking tissue to plastic sheeting. Clean to use, no strong smell, and the can lasts ages.

I used this adhesive to re-attach an important guarantee sticker to my new bath tub. What it doesn't mention in the description is that this is a contact adhesive, so you need to apply to both surfaces, allow it to become tacky, then bring the surfaces together. It worked well for this application.

Gentle, even spray. Was a bit apprehensive of consistency of application but no need.

Bought a can to use for sticking mainly paper and card together - the glue works very well for this purpose. If you shake the can well and it is at normal temperature you get a good fine spray of glue which covers well. had no problems with 'stringy' glue as some have complained. Definitely one for a repeat purchase.

It’s not what I expected. Not good

Worked well to reattach fabric covering to a car interior trim part. Stuck to the plastic without bleeding through the fabric.Seems to be the same as EVO Stick but without the yellowish tint and bleed trhough I had with that on vinyl on another project.

Is my tin defective? I tried to stick some PLA printed parts together with this and, despite the good reviews, it didn't want to stick at all. They just kept falling off, even hours later.I then tried to coat the inside of the helmet to combat some delamination and it won't dry. 24 hours later it feels like I smeared jam all over.