Casaverde 6" Diamond Turbo Cutting Blade for Granite and Marble

Used this cutter blade to cut to width on some store-bought granite vanity tops. After measuring the desired cut lines and marking with blue painter tape, I used this blade to cut the excess off (from 1" up to 4" excess). First, score the desired cut line. The painters tape helps see the desired line since much fine dust is created during the cutting. After several passes, cutting into the granite about 1/16" or so each pass, the cut line was fairly well defined. Next, I carefully and slowly cut along and through the front edge profile (being thinner, it is susceptible to cracking/splitting) and the back edge that goes against the wall - any unexpected fracture during the remaining cutting should leave the finished top intact. Then I continued to cut through the material as before, taking off 1/16" to 1/8" each pass until the trim piece separates. This disc has enough grinding material on the side to use the blade's side to remove slight irregularities in the cut edge as well any other imperfections prior to final polishing (if required). If cutting a vanity top to size, I recommend keeping the vanity top in the original box as it will provide the best support during the cutting, and it works well as a support if you need to polish any edge after cutting. If, like me, the vanity top needs to fit between two walls, you can use this blade to back cut the rear corners, and bevel the hidden under edge of the top so it doesn't catch on the walls as much. Just be sure not to bevel cut the bottom of the front edge/profile. I also purchased a grinding cup wheel, which quickly removes a lot of material - this blade works better for removing less material at a time and prepping for polishing. Overall, it is a good cutting and fine grinding disk.

I had to cut only about 19 inches or so length of a granite (3 centimeters thick) to make the hole slightly larger for new cooktop. It worked very well. Pretty happy with the cutting disk

I should have read better, but from the pictures I thought I was getting 2 blades and there’s only one. That said, it worked great on about 2 feet of 1-1/4” granite that I cut with it. Typically sellers will show different sides of the product in separate pictures if it is only one piece, which is the only issue. Can’t comment much on durability with how much I cut, but blade still looks new.

Excelente, lo recomiendo 100%

I ordered the wrong size but it just fits inside of the blade guard with just a mm of clearance. What I noticed when I picked it up was the weight, double what my old disks were, and the diamonds were bigger. I use it on the rockwork I'm doing, both flat patios and dry stacked walls. It cuts about twice as fast as the disks I was using. With the mistake I made, that extra 1/4" makes an incredible difference on the rocks I can cut. All that and it's $2 cheaper than any local disks I can find. The disk is well balanced and cuts smoothly.

Doesn't spell out Arbor Size in listing...its not 5/8" Arbor Hole I needed, and didn't know till I got it. Sure shows pic with mm listed, which I can now interpret as diameter/width/abrbor in mm In US we really don't use mm for saw sizes. They should spell it out in the description.

work like charm have face shield and respirator and open areas make a lot of dust

Super durable grinder blade for cutting granite/quartzite. Was buying a slightly thinner, more flimsy blade especially for granite and quartz at a specialty stone supply shop for more than double the cost. This blade easily last 3-4X times longer and gives a clean cut.

Corto muy bien en granito