Symmons T35C Temptrol Universal Seat Removal Tools,Silver

This product worked great, very well built, convenient carrying setup, etc. BUT, and this no reflection on the product itself, the project was a large pain in the a$$ to complete. The tools end up basically shredding the brass inserts as they were sooo very stuck in there. Short of cutting the piece out, it took about 90 minutes to do a 15-min job. The tool itself was so good though, didn't even get scratched during that agonizing process.

Excelente muy buen material más bien diría de lujo. La persona a la que lo regalé está eternamente agradecida muy útil en el trabajo. Lo recomiendo.. La persona a la que se lo regalé me dijo que por falta de esa herramienta había perdido de ganar dinero. Ahora está activo para desempeñar ese trabajo gracias a la herramienta que le di

The tool worked perfectly for shutting off the valve stops.

Great tool for specific job, priced to high for average home owner for possible one time use.

I replaced the Symmons Temptrol valve parts for two shower valves this summer. My research indicated that the Raven tool would be needed to extract the hot/cold seats so I bought it. Then I noticed a sticker on one of the Temptrol seat boxes that said the newer Symmons Extractor tool would be needed for the newer seats. So, not wanting to get stuck in the middle of a project with the wrong tool, I bought this. I had also heard horror stories about removing the seats so I hedged and also bought a pipe extractor in case the seats stripped. Anyway, this extractor tool worked perfectly. It removed all 4 fairly old seats without any difficulty at all. It's very heavy duty and solid. I breaks apart into a few parts because it does a few different extract/install jobs but you can keep it all together with Velcro strap and pin that runs though all the parts and keeps it all together. I should mention that while the box sticker had said this tool was needed for the newer seats it also works on the older seat. Very satisfied.

This Symmons kit has all the tools necessary to repair all Temptrol faucets, both old and new. The most impressive feature of this kit is the very reasonable price for such high quality parts. Each piece is nicely machined, and very "heavy duty". I had been about to order one of the aftermarket combo tools, but I am very happy that I went with the Symmons brand kit. You will be happy if you buy it.

Works perfectly for my son to use for his job!

I used the tool to remove seats on a 30 year old Symmons tub and shower Temptrol. It worked perfectly. After making sure tool was fully seated, I applied steady pressure and the seat broke loose and unscrewed. Large seat was done first. The tool fits into tiny slots in the seat. But it worked fine. Smaller seat has square fitting and it also came loose easily. I used a socket wrench on the smaller one. I ran hot water thru the valve for a while thinking that might help soften and harden deposits. Not sure if that helped.

The tools supplied are high quality however the cold water seat removal tool strips out the brass notches of the cold water seat and is unable to remove the cold water seat when used on old shower faucet installations. A No.8 spiral screw extractor tool (good for 1-1/8 to 1-1/4 in. dia. screw) is needed to remove the Symmons shower faucet cold water seat. The cold water seat tool works fine for installing the replacement cold water seat and the hot water seat removal tool works fine for both removal of old the hot water seat and installation of the replacement.