3D Printing 3D Printer Adhesive for Adhesion to Heated Print Bed, Spray, 400 ml 13.52 fl oz

Absolutely love this product. My brother runs a 3d print shop and recommended this to me when I got mine. I was so sick of scrubbing glue off of plates that this product feels like a lifesaver. It works extraordinarily well, keeping pieces secure on the plate with no warping. Very easy release, and it leaves the bottoms of the piece looking perfectly clean. I've been spraying it about every three prints. but I'm sure it could go longer without issues. I've only used it with PLA so far. I believe that it is worth the price, although I haven't determined how long it lasts yet. I also think it smells really good. My only nitpick is that the nozzle could use a little more control.

I got tired of using glue sticks as they took a while to apply, and sometimes it was difficult to tell if they were applied where needed. I was recommended this and honestly, it's so easy and works so well that they have a customer for life

This stuff is great, better than nano polymer adhesive and cheaper too, though I would recommend waiting for this to go on sale if you can. Unlike what some have claimed this isn't just relabeled hairspray, It has better adhesion than hairspray, and unlike hairspray it doesn't degrade even at 120C bed temps. This is the first adhesive that I've tried that works well on bare steel, so no more destroying buildtak/pei/glass beds with prints that stick too well to the build surface. It does need some help with larger ABS and PC prints, I use ABS slurry in addition to this adhesive which entirely prevents warping at the cost of ease of removal. If you're just printing PLA parts, they hold well, come right off when the bed cools and the adhesive lasts for quite a few prints before needing to be reapplied. I haven't used it much PETG, frankly I find it more annoying to print than ABS, but the two prints I have done with PETG have stuck well and released easily when the bed cooled.

Cannot recommend this stuff enough, I should've bought it ages ago. Have spent a significant amount of time attempting to get PETG to reliable stick to the textured bed of the Elegoo Neptune 4 Max, friend of mine suggested this stuff and it's been incredible. I sprayed some on to test it and it's printed first layers without any failures or lifts for about 20 prints now without needing to reapply it. The spray can makes it super easy to get a good coat without using much, and while it does have an odd smell it dissipates fairly quick, especially when used in short bursts.

The glue is awesome and works as advertised. The can is absurdly tall though. Taller than a can of Lysol. I'm happy to have so much product for the price, but it's hard to find someplace to put this thing. That's my only complaint.

I've heard it's just expensive hair spray but iy seems to last forever, almost never do prints fail, it seems to stick beter than hair spray, and I can get TPU off my print bed now. It' worth a try.

Smells like grandma's can of hair spray. Works well for holding down your prints. I don't use it all the time, but if I'm having trouble getting something to stick, this usually does the trick.

This stuff is fantastic on a textured PEI plate - the standard plates on both my Anycubic Kobras and my Bambu H2D. It is a little less effective on the smooth patterned plate with the holographic effect, but that's okay really. I use a different formula for those that works quite well. It does not leave a sticky residue on the plate, although sometimes afterwards I can feel it a little on the print. It easily cleans up with warm water or rubbing alcohol. I've used it with PLA, PETG, PA-CF (nylon carbon fiber), ABS, and ASA, all with success. the latter three were in the closed environment of the H2D. I will probably purchase it again when the bottle is gone, but it is lasting a long time. Does not really need to be applied every single time, maybe every other or third print. I also don't wash it off each time either and it hasn't really built up or anything.

Forse anche troppo forte!

Ich hab den 3DLAC Sprühkleber (400 ml) über mehrere Druckjobs hinweg im Einsatz gehabt, und wenn es um eines der stillen, aber entscheidenden Helferlein im 3D-Druck geht, dann fällt dieses Produkt ganz klar in die Kategorie „macht, was es soll und zwar zuverlässig“. Was ich sofort mag: Die Handhabung ist einfach und vorhersehbar. Leichtes Aufsprühen, kurz trocknen lassen, und das Filament haftet sehr gut – gerade bei PLA oder PETG spürt man den Unterschied, wenn die erste Schicht sauber und plan am Bett sitzt. Kein lästiges Nachjustieren der Druckbetttemperatur, kein „Ränder heben sich, Mitte bleibt kleben“-Drama mehr. Gerade bei großen oder flachen Drucken ist das ein echter Komfortgewinn. Der Sprühnebel verteilt sich fein, ohne gleich eine nasse Pfütze zu hinterlassen. Das sorgt für gleichmäßige Auflagefläche, ohne dass man hinterher Stunden mit Reinigen oder Abkratzen verbringt. Und falls doch mal zuviel drauf ist: Mit etwas Wasser oder einem feuchten Tuch lässt sich das nach dem Druck recht einfach entfernen. Die 400 ml-Dose reicht erstaunlich lang – ich drucke regelmäßig und habe bei weitem noch nicht die Hälfte verbraucht. Das ist angenehm, weil man sofort merkt: So ein Helfer wird nicht zur Einwegware, sondern bleibt länger im Werkzeugkasten. Fazit: Ein solider Sprühkleber für bessere Haftung auf dem Druckbett, der zuverlässig und ohne großes Gefrickel funktioniert. Besonders bei anspruchsvolleren Drucken oder wenn du öfter mit Materialen arbeitest, die nicht von allein anbetten wollen, kann 3DLAC wirklich den Unterschied machen zwischen „läuft sauber“ und „Stop-Spiel“. Im 3D-Druck zählt die erste Schicht oft mehr als alles andere – und dieser Sprühkleber sorgt, dass sie nicht zur nervigen Hürde wird.

3DLac, que decir de esta laca para evitar warping en la impresión 3d, y tener primeras capas bien hechas. Yo que tengo bandeja PEI Texturizada ya que dice en una esquina que use pegamento. Y con uno en spray, gastas poco, dura mucho, y tiene muy buenos resultados. Y si te lo venden en packs baraatos, BBB

Mágico una fina capa pero muy fina y te dura un montón y no te pases porque no vas a tener co….s quitar lo recomiendo es lo mejor

Envoie rapide