Permatex 80208 Anti-Seize Lubricant with Brush Top Bottle, 16 oz., Silver

The gold standard of anti-seize. I purchased this to replace an O2 sensor. Definitely worth the cost… you don’t want anything rusting in place the next time you have to pull a bolt.

Probably more useful than I expected for an 8 oz jar. My son insisted I get this for the bolts on my old garden bench and the mower, and he was right, it works well and goes on smoothly with the brush. one thing though, the bottle gets messy fast and I wish the cap sealed a bit tighter.

quality is good , pretty good adhesiveness , slipperiness ad it should , color is just fine , Greasiness is just fine

Good bottle of anti seize. Its nice having the brush built into the cap to make it easy to apply. However, since the brush sticks out, it dips deep into the bottle. Imagine something like that on a peanut butter jar, it will dunk down and coat way up on the brush, so the brush it really coated in the anti seize when you only want a small amount on the brush. Its somewhat hard to wipe the excess near the lid without it making a mess. Regardless the brush shaft has a lot of anti seize, no matter how hard you try to wipe, then wherever you try to apply might get excess where you dont intend. Its also like glitter, it gets everywhere and its a pain to get off. Brake cleaner helps remove it, but it is expensive. I have not tried degreasers or other solvents. It is a large bottle, more than anyone would need for one car, one brake job. Would last the lifetime of the car, probably the lifetime of 20 cars. Mechanics might run out of this bottle, but others would never use up all of it.I have seen some people try and use this as brake grease, but I do not recommend that at all. Only where you want two faces to not seize together from rusting, aka anti seize. The best place is the brake rotor to the hub surface. Some might apply a little to the outside rotor surface to prevent wheels from seizing, but I do not. I would not recommend using for the pad ears, clips, caliper slide pins, or other recommended grease locations. I am not sure of other common locations to use this, but rotors are the main one I am sure.

Since I got a bottle, I would not Work on my JK If it's not next to the tools I need for the job

La botella vino con la tapa suelta y se derramó el liquido en otros productos.

It was exactly what I needed. It is a great product. This product will work great on my snow blower axles. I highly recommend it.

I bought this for a small living-room project, not for the car. I was putting together a heavy secondhand media console with metal legs, and a couple of the threaded bolts felt rough going in. I brushed a little Permatex onto the threads before finishing the job. The brush in the cap made it easy to put a thin coat where I wanted it, without getting grease on my fingers or across the floor.A few weeks later, I had to take one leg off again to route a cable behind the console. The bolt turned without that grinding, stuck feeling, and I was glad I had this on hand. It is a thick, greasy compound, so I used a small amount and wiped the extra off the threads. The 8-ounce bottle is more than I need for furniture work, but it should last a long time for other metal fasteners in my garage. I wipe the brush before closing the lid, then keep the bottle on a shelf. That little cable job went a lot smoother than I expected it to.

Exactly what i ordered

works really well and would use on all cars

Good product with good value, works really well.

Buen producto, cumple las expectativas y lo recomiendo.

Delivered as described.