PowerMadd34252 Star Series / Trail Star Handguard Mount Kit - ATV/Motorcycle

I've got a Yamaha SR Viper X-TX. The handlebars are pretty crowded and you'll have to loosen the fasteners that hold your throttle & brake assemblies in order to fit these brackets on the bars. The X-TX, and M-TX SR Vipers have the grab handle incorporated into the handlebars. One other thing; I mounted both brackets flush up, against hand grips, and the brake and throttle modules - for each side. Yamaha put the hand warmer wiring towards the front of the handlebars. If it were to the rear, you could slide the steel loops around the handle bar, then attach them to the aluminum brackets. But...they are not. So, I had to mill a notch on the throttle side to allow the hand warmer wiring to pass through the bracket. If I were to put the bracket on the other side of the throttle module, the hand guards would have looked odd. Anyway, the brackets and hand guards were good to go, I just wanted to let people know that they may have to modify the equipment to get these to work well.

Installed on 2017 Polaris 800 Pro S with stock handlebar. Went on as expected but the problem was the throttle cable had to be routed over the bracket. This caused it to get pinched by the throttle lever when it was wide open and the throttle would get stuck! Not good when you’re going 100+mph! So we made a minor adjustment. We took a grinder to the under side of the bracket just in front of the lock nut. This created the perfect space for the throttle cable to slide through between the handlebar and the bracket. Problem solved!

They fit a 2018 c-force 400 great. I had to move the right brake cylinder a little bit that's it.

Mounts work just fine. The hand guards themselves are garbage. Mounting instructions are poor. I mounted these on my atv in late summer. It hasn't been ridden. Got it out to plow snow several months later, and the mounts are good, but the hand guards are cracked through at each mounting bolt.

Solid. No directions. Lots of extra hardware with no explanation. I had to refer to the add here on Amazon to see a picture to get an idea how they were to go together. Mainly due to the extra really long screws and two pieces of vacuum hose??? and not sure. Probably has a use with compatible parts and accessory options but no way of confirming that. Over priced and should be included with the hand guards I bought these for.

'Universal' kits frequently don't work as well as hoped. I got these to fit my FZ-09, but not great. I'm glad I got them though, especially when it's very cold.

These barely cover half of my hand even with the spacers. Looks dumb and doesn't do much. 2013 Arctic Cat F800

These are a bit of a pain to mount. Its easiest if you have two people to hold everything in place and then bolt it all up at the same time. I had to modify my housing for the clutch and brake to get them lined up right. If you have a way of making your own mounting, do that. The more you tighten these to keep the hand guards from rotating down/up from wind, the less they actually hold.