RinGuard Ring Size Adjuster with Jewelry Polishing Cloth (Set of 3 Sizes)

Seriously, the best sizer ever! I had extreme doubts prior to purchasing. I had already purchased a popular metal Sizer sold on Amazon. Unfortunately, somewhere between packaging and receiving, my item was drastically damaged/deformed. Since my husband is very good with fixing things, he was able to get this sizer on my brand-new ring. You could tell it was seriously messed up but it still did the job and surprisingly was comfortable. I am a perfectionist so I was not satisfied and ordered a new one and that is where I came across this. I had looked at adjusters like these before but didn't think much of them. I read the reviews for this one and decided to give this a try before I put another metal sizer or layers of liquid resin on my ring. My ring is a custom made ring that I designed and has a 4 carat fancy yellow round center diamond surrounded by a halo design with a semi split shank. There are a few small added extras to make it a custom design that I had copyrighted and that worked out for me well as I am making a fortune from other jewelers using it. I had it made in size 7 as I do everything though I know my ring size is smaller. I always do this because anytime I go into the jewelers and try on a ring on display, it always fits. As most people who have ever been to a jewelers knows that the standard size for all rings on display is a size 7. They do this for a reason. I also did this for the time during the month I would bloat. The ring graduates to about a 3 mm bottom shank. I have other rings like that that fit but are loose. This one however is so top-heavy that the ring was spinning and would have just flown off eventually. I had to do something urgently and I do not want to have it sized if I do not need to. To size it properly, they need to remove every single stone, then size it and obviously replace the stones. Because of the cost of this ring, I really want to avoid that if at all possible. Now we come to this. I bought this along with the replacement of the metal Sizer. I have prime and a warehouse 30 minutes away where Amazon ships from. I can be quite impatient about certain things so I overnighted this one and sent the metal one regular free two day delivery. I am extremely thankful that they sent three different sizes because I was already assuming the small one would have been the one to do the job. That is the first one I put on. It fit nice but it did not fulfill the sizing needs I needed. I needed to go down at least one full size. After I put on the smallest one and tried it on my finger, I removed it and went straight to the largest. The largest was the perfect fit and sized my ring Exactly as I needed it to be. It was comfortable from the first second I placed my ring on my finger and it literally is not noticeable. It is basically invisible. No exaggeration. My only problem with it was that because I had to use the largest wrap, it was covering a few of the diamonds on each side of the ring as I have diamonds going down at least half of the shank on both sides. I decided to take it off and rewrap it. This time, I took my time and pulled very hard before I wrapped each time leaving no spaces in between. That way, it gave me an even better sizing for my ring and came just below the diamonds on the side. There were no gaps in between each wrap. This is truly the best thing ever! I LOVE ❤️ it! I am a perfectionist and can be very critical. I just say it how it is. If there is something wrong with any item, I confront the issue as kindly as possible but I believe in getting what I pay for and what is promised. All I can say is.....I ABSOLUTELY LOVE IT! I am a such perfectionist to where if something has the slightest thing wrong with it, it will drive me absolutely nuts! This does not do that so I am VERY happy! 😁 It looks great because you can't see it, it is SO COMFORTABLE that you can't even tell it's on AND it has corrected my sizing issues COMPLETELY! I would definitely recommend this to anyone and everyone I know and those that I don't, like you...yes, you! Right there in the black sweater reading this. This is for YOU! 😉 You seriously cannot go wrong with this adjuster. I will never go to any other adjuster ever again. I have been through the liquid resins where you have to apply thin layers at a time and use a UV light. I have been through the traditional metal adjusters which work very well and are comfortable but this product absolutely beats everything on the market! I have to say, I had MAJOR doubts about this even prior to purchase. When I opened the package, I still had very low expectations, until I tried it. Take this from someone who has literally tried just about everything out there and from someone who has to have it perfect or will not be satisfied and would continue to look until I found the perfect thing. That is what this is! PERFECTION! 💯% ❤️❣️❣️❣️ I am SO HAPPY I tried this! Especially because I have just received a lot of my parent's jewelry from their estate. That part I wish I could change. 😢 Since every piece is custom and some heirloom pieces from my grandparents and great grandparents that are just too big for me but I would never resize them. They are too dear to my heart and are all I have left. This adjuster lets me wear those pieces whilst keeping them intact. I hope this review has helped you and I will upload a few photos to show you how amazing this is though you probably won't be able to see it. 😉 (That's a good thing!) 10 🌟'S and 👍🏻👍🏻 LOVE ❤️ LOVE ❤️ LOVE ❤️ ALSO KEEP IN MIND, YOU ARE ONLY SPENDING LESS THAN $10.00 FOR AN ITEM MADE FROM PVC WHICH IS EXTREMELY DURABLE AND LONG LASTING. WITH THE PROPER CARE, JUST ONE SHOULD LAST YEARS, AT THE VERY LEAST, WHILE ALSO GIVING PEACE Of MIND AS WELL AS POSSIBLY SAVING YOU THOUSANDS TO HUNDREDS OF THOUSANDS! I THINK LESS THAN $10.00 IS AN EXTREMELY SMALL PRICE TO PAY FOR PERFECTION!

Very pleased with this purchase. Let me start by giving you the background on my ring and the need for the ring guard. I have a Verragio ring that has scrolling at the top of the ring, where a traditional ring would be round like in the stock photo, so it makes sizing hard to begin with. Second, I have very big knuckles, so to size it to fit my actual finger, I am unable to slide the ring on and off over my knuckle without using soap or lotion, which is so bad for the ring and the diamond. I used the clear tube looking ones in the past but they are hard to put on, constantly pop off and are so obvious and stand out like a sore thumb on my very thing band. I was fed up with this and had the metal bar installed but after a month of tightening and loosening it, it snapped. So did I. I have this gorgeous ring and it slides all around. It's upside down more than it's rightside up. I searched ring guard on Amazon and this unique design popped up. I've never seen one like this before. First, it arrived faster than the two days. Major points. These come 3 to a pack, with a variety of lengths that allow for this to wrap around a thin band or a thick band. Since my band is very thin and I didn't want the plastic to show on either side or irritate my finger, I chose the shortest in length. I began wrapping it around my ring and when I reached the desired fit, I simply trimmed off the end and wrapped the remaining piece around. The fit is perfect. Since this doesn't pop on and off like the cheese plastic tubes, I do still have a little trouble getting it on and off over my knuckle, but once it's on, it stays put. It doesn't slide around, it barely shows and it's not big and clunky. For those asking if it will fit around a thicker band or a band that has been sodered, it should with no issues. Just use the longest of the 3. Very pleased and will definitely buy again.

My ring a 1 size too large so tried out the RinGuard Ring Size Adjuster. Pros: 1. Easy to put on 2. Reduced the ring size 3. Did not gather any water or any product 4. Dries quickly 5. Leaves the skin dry as well 6. Almost transparent, although I did see some mild color on it after daily use Cons: 1. I think it is just me but I still feel my ring is going to fall. Maybe investing in resizing is better for an expensive ring 2. Not sure of how long it will last. I will update in a few months 3. The ends tend to unwind Overall it is a good product. Would recommend if you a looking for an easy way to resize your ring

These have to be the most comfortable ring size adjuster I have ever worn and as an added bonus they're practically invisible. Right now I'm using the smallest one to keep my rings lined up evenly (they spin a little and it drives me crazy). It's working perfectly and I can't even feel that it's on. I feel safer too knowing that I have the adjuster on because my rings were a little bit loose (about 1/4 size). While it does show up really well in pictures, from arms length all you can see is that it's extra shiny where the adjuster is. I will definitely be buying more for my other rings. Update: After having these for a little over a week, I washed my hands with the ring adjusters on while I was out, and they became very loose and uncomfortable. I shouldn't have to take my rings off to wash my hands; that would defeat the purpose of having rings that stay on. They don't prevent my rings from spinning anymore either. I didn't cut one of them and it still became loose. The do make them the slightest bit tighter, but I will definitely have to buy different ring adjusters.

Used these for an engagement ring that was a bit too big. I don't like the design of most other ring sizers because they are big and bulky and easily noticeable. These are easy to put on your ring and easily adjustable. When I first put it on my ring, the edges felt like they were cutting into my skin and it was fairly uncomfortable. After a couple of days, the newness wore off and it was actually pretty comfortable. The material feels vaguely rubbery, so it kind of grips to your skin. However, that didn't last long. I never wear my ring when putting on lotion or washing my hands, but the sizer got very nasty and grimy looking. It lost it's elasticity and slid around the ring constantly. It also somehow shrunk a bit and my ring didn't fit anymore with the sizer, I had to wear it on a different finger so it didn't fall off. I used it for about 4 months, and it was good for maybe a month and a half of that. I think these would be fine if you have a ring that's too big that you plan to get resized soon, or if you don't mind replacing them often.

I have a ring that's a size 6 and my ring finger is really a 5. I didn't want to send it in to be resized because I love it and don't want to be parted from it for 1-2 weeks, and there's always the worry that someday my fingers may swell and a resized ring would no longer fit. I read reviews and hoped for the best. The loops aren't too noticeable when my hand is palm up, and unless someone was really, really looking the loops act as a magnifier and just make the band look thicker. It's comfortable, my biggest complaint with the un-sized ring was that as I would type the stones would work themselves palm-side, and I had a constant battle of readjusting (or even taking my ring off all together to type). But, I'm sitting here typing up a storm and my ring hasn't rotated at all. Quick delivery and easy to put on the ring. 3 units that can be trimmed if needed. I hadn't seen anything like this in a local craft store, etc., so I don't know if the price is comparable if found locally. I felt like this was a good value. I put the other two units in an unused compartment of my jewelry box in case I ever needed them for another ring or if the first one wears out.

This is not a long term solution for a too big ring that is worn daily. My finger size fluctuates with the weather and in the colder months my engagement ring is just ever so slightly too big. Not a a large enough difference to warrant resizing and also when my fingers swell/it warms up the ring fits snugly. These seemed like the perfect solution to wear in Winter to keep my ring from spinning around. At first, I thought it was great. It went on easily and kept my ring snug to my finger. With a few days wear, however, I noticed how grimy the spring was becoming from all the hand sanitizer, hand lotion and hand washing I do daily at work. My ring just felt and looked dirty where the plastic was. Also, the spring started to loosen (I'm assuming from taking it on and off) and the ring stopped fitting so comfortably. Took it off. I can see this working for special occasions but not kept on the ring long term.

I'm very happy with this Ring Sizer. I had previously purchased the Ring Snuggie, it was a thick tube and hard to fit to the ring. Plus it felt like it was always there and I had to remove it to take off the ring. And then I was worried it would fall off because it had one cut down the longways and I was always worried if it rubbed on something, it would peel off. It started to separate after wearing it for a week and removing it too. I've had THIS sizer on my ring for about 3 days and it works great. I barely notice it on there, even though I had to use the largest size. Good thing I bought the 3 pack because I had no idea what size I would need. It is smaller than the Ring Snuggie, but its not as awkward and was so much easier to apply. PLUS, I didn't use the whole sizer, so now if something were to happen to this one, I still have more to wrap around and fit to this ring. I plan to use this all winter as my fingers shrink in cold weather. I will update again in a few months, it will not start to warm up here for another 2 months before I think I will notice any difference in my finger size.