VViViD Blue Stencil Vinyl Masking Film with Anti-Bleed Technology (12" x 6ft)

The picture is ridiculous. You think you are getting a butcher paper roll of the vinyl. Nope. It is definitely a low tack vinyl, practically falls off the backing once cut, does stick nicely to very flat surfaces (such as non-textured glass), but not much else. I purchased this to make patterns for stained glass, I am not unhappy with it, but I ended up ordering a permanent stick vinyl for future projects. Did not stay during the whole grinding process, but still better than sharpie or alcohol inks. Actually would work better as a transfer tape. For the cost I'm not too bummed.

Used this for masking airbrush overspray on a large stretched canvas. it honestly was pretty sketchy. had to use a chopstick to hold it down on thin areas when passing with the airbrush because it'd blow up from the air pressure (adhesive too weak). if this were used on a wood panel or even paper it might be perfect. The flex and non consistent texture on the canvas prevents the best bond being made between the adhesive & surface so it was a little nerve wracking when using this. I took it slow and was patient and it turned out great. probably about 5 hours of work on a 4x5foot painting with full masking using a stamp to add texture and an airbrush to add drop shadows in. masking film is vivd blue and transparent, great for seeing dark underlying markings for cutting, a little difficult to see through when used over areas of similar color tho. (contrasting edges is key) this masking film eats through xacto blades like crazy tho, went through probably 20 blades cutting out areas of coverage. clean hard edges were great, subtle and sharp rounded curves were very tedious. Didn't leave any residue on my work surface which was very convenient as well. all in all i'd buy it again, can't beat the price vs frisket and other current masking options. this product is intended for cricut stencil making but was acceptable for fine art application.

I use this stuff for it's intended purpose: as stenciling. I use a 34" vinyl cutter/plotter to cut out the design. - cutting: it cuts effortlessly. The plotter has no issues it feeds like it should, and cuts like it should. - weeding: easy, no issues - application: this part can be a nightmare with other brands, but this one does well. Enough tack to stick, but not so much that it can't be lightly reapplied. Doesn't stick to the transfer tape, but I use the LOWEST amount of tack possible for the tape to aid in separation. No issues. - paint: this is where the product shines. I don't know how, perhaps it's the "anti-bleed" technology 🤣, but it actually does soak up a bit of paint during painting. This must contribute to the perfect, clean lines it produces when removed from the canvas. Removal is easy. I've even searched and called the company itself trying to verify this claim of anti bleed technology lol, as it sounds like marketing bs. No one could clarify, sounded like they had no idea what I was talking about. But either way, it just works.

This is a decent product and performs as advertised. Does not seem to leave residue but I applied and removed within a day. Only reason for a 4 star instead of a 5 star is that it develops air bubbles while cutting. Didn't cause me issues but it could definitely if trying to cut something with a great deal of details.

Okay, I was looking for a stencil vinyl to cut with my Maker for reusable stencils to paint text on little succulent planters I make. I was getting the Vivvid brand to try out because it was the best price by far but I ordered Oracal bc it’s Oracal, right? You assume Oracal is a tried and true. Well, I ran one mat with both brands. I wasn’t sure about the cut settings and couldn’t find the thickness for either product so I just picked one. It went horribly wrong. The Oracal reviews about it lifting on the carrier are accurate. I had to use a scraper to flatten it back on the carrier sheet. The pressure was picking up the cut pieces and it jacked up the whole stencil! Top left is the Oracal from my first run. Granted, these are teeny tiny designs with a decent amount of detail. This Vivvid brand didn’t have any of those issues even with the pressure set too high. Determined not to quit, I paused the cut and Changed the material setting to Cricut stencil vinyl but I lost connection and had to start the mat completely over so it was cutting on top of already cut vinyl. That was a disaster but again, the Vivvid held up to my constant attacks! The bottom stencil is the Vivvid after all that abuse. Still set on not wasting the Oracal, I tried a brand new mat, used the Cricut vinyl setting, and also changed the pressure to less pressure. That seemed to do the trick and it came out great (top right) even with all those tiny cuts. But again, the Vivvid stayed down and cut well with multiple incorrect settings. It seemed to do the best on Cricut stencil setting with regular pressure. Even with the light pressure, the Vivvid wasn’t cut all the way through but it didn’t rip at all when I was trying to weed. The pieces that weren’t cut all the way tore easily away along the cut lines. Both brands stuck to and removed from my surfaces (used with concrete and glass) very easily and both prevented any bleeding under the stencils. Both also cleaned up easily with a quick rinse under water and both worked just as well after washing and reusing. All that being said, if you have the Oracal, it will work well as long as you can get the right pressure setting on your machine. If you’re looking for a brand to try, the Vivvid is a much better price, super consistent, and a ton less hassle!

I really wanted to love this stencil vinyl, but the more I work with it, the more I hate it. Maybe user error, i don’t know pros: •it doesn’t pull splinters off wood when removing from project •it adheres nicely to wood and glass, doesn’t bleed •great for large stencil projects if you can find the right cut setting cons: •not easy to weed intricate details, the vinyl doesn’t stick to its backing so the small details you want to keep slide. •I struggle to find the right cut setting for this material on my machine. So far iron-on (mirror off) has been the best setting but not perfect. Sometimes I have to send it through twice but again those small details you want to keep slide around and it doesn’t cut through nicely in all areas. (new blade installed on machine). The weeding process is driving me crazy, taking way to long and ripping in places it didn’t cut all the way through. Will be trying a different brand.

I used this VViViD blue stencil vinyl masking film for painting and engraving-related stencil work, and it performed very well overall. The material cuts cleanly and weeds reasonably easily without stretching excessively, which is important when working with smaller lettering or detailed stencil designs. The blue color also makes it easier to visually distinguish cut lines during setup compared to standard white masking films. The adhesive strength feels well balanced for stencil applications. It adheres securely enough to minimize lifting during paint application, but it also removes cleanly without excessive residue in my experience. The anti-bleed performance was especially noticeable on sharper edge details where cleaner paint lines matter most. What I appreciated most was the consistency during application and removal. Some stencil films either tear too easily or allow too much paint creep under edges, but this material provided good control and predictable results. For craft work, signage, engraving projects, or paint masking applications, it proved to be a solid and reliable stencil material.

Very happy with results. I did a test stencil where I painted base color on half to prevent bleeding. After painting the stencil and peeling away the vinyl neither side had any bleeding issues.

Bought this to cut some stencils for custom paint jobs on guitars. Works really great. My only niggle was that, after it's been stuck on for a few days, it does seem to leave some adhesive residue behind, but that's probably my fault for leaving it on for a few days rather than doing all the painting in one go and peeling it off quicker. Leaves really nice crisp lines, will definitely use it again.

I make wood signs and make stencils for them with my cricut. This vinyl work great and will definitely be purchasing again.

Excellent product

Perfect for cricut and pottery stencils

I use it for sandblasting stencil designs on glass. Holds up perfect with no bleeding. Easy to transfer and tack level is perfect.