10pcs Upgraded Tiny Whoop JST-PH 2.0 Male and Female Connector Cable for Battery JJRC H36 H67 Blade Inductrix E010 E013

These connectors are another essential item to keep in the workshop for 3D printer maintenance and electronics projects. In addition to my Creality K2 Plus, I also have two older printers that require more hands-on maintenance and occasional wiring repairs. Having a variety of connector sizes readily available makes troubleshooting and replacing damaged cables much easier. The connectors are well made, fit properly, and have worked exactly as expected. They are easy to solder and provide reliable electrical connections. If you enjoy 3D printing and perform your own repairs and upgrades, these are a must-have item to keep in your spare parts inventory.

Used for hooking up a RAK meshtastic board. Quality seems ok. Worked for my application.

These are nice connectors, and I expect that they will also find uses in my model work. They mate extremely tightly (pliers may be necessary to disconnect), which is a good thing in their usual application, and at least acceptable in most applications. The pigtail wires have very soft insulation, strippable with a fingernail, but ordinary soldering does not melt or scorch the insulation. They are the correct connectors for the FM antenna socket the Sony stereo receiver mentioned in the title. The one weakness in that receiver is that the FM antenna connection is nonstandard, making it difficult to connect anything other than the length of wire that comes with the receiver. A bag of these connectors, and possibly a standard TV/FM antenna balun, will allow you to connect the antenna of your choice. This is the correct connector, as of June/July 2024. Assuming 75 Ohm coax from your antenna, simply solder the pigtail leads to the 300 Ohm end of a TV antenna balun (polarity does not matter), insulating with tape or heatshrink, or tape, and you can plug your antenna in directly. Or if your antenna lead is 300 Ohm twin-lead, solder it directly to the twin-lead.

These connectors are great if you plan to plug them together and rarely (if ever) take them apart again. The video shows how to use them, but unplugging them takes a lot more force than it makes one believe. I have used these in model trains, and they work well.

I needed the female end of one of these to fit the male end on a battery I had and it fit and worked perfectly. It was a great product at a good price and now I have some spares.

Works great for my need (Adafruit batteries), but the polarity is reversed. You can either use these as is, but keep in mind that the colors are wrong, or you can swap the polarity yourself. It is pretty easy to do. Find a very small screwdriver, pick, tweezers, or something else with a tiny pointy end and carefully pry up the small tab on the connector and then pull the wire out of the connector. Do the same on the other wire and then reinsert the wires into the connector with the polarity that you are wanting. Give the wire a slight tug to make sure it stays in place. If not, remove the wire and bend the plastic tab on the connector down to provide more tension on the wire and then reinsert the wire.

These are fine. Needed for connecting power to RAK WisBlock board. Now I have extra.

I got these because my dashcam's tired old battery gave up. The lack of battery power led to my footage getting corrupted whenever I turned my car off, so I decided to open it up to see what battery I needed. Unfortunately, the original battery was soldered to the motherboard, so I took the old battery off and put one of these connectors on so I could connect a new battery anytime a new one gives up. This made my repair possible! I almost needed my dashcam the other day too; nearly got in a wreck because someone blew a stop sign.

Alles bestens, gerne wieder!

As described

Excelente calidad!

Normaux, rien à signaler

Qualidade top e fácil de usar