MOST RECENT VERSION OF CAR DENT SUCTION PULLER --- A tool you don’t need to pay more money on fix the dent on car or other metal serface, a tool that saving your time on car repairing. PS: Glue gun and glue sticks are not included; The alcohol bottle is empty, since the alcohol is not allowed to ship overseas. Package list: 1 × Aerometal bridge dent puller 1× Empty alcohol bottle 1 × Instruction 2 × Galvanized iron spring mount 2 × Glue shovel 13 × Blue glue puller tab Operation Method： 1. Clean the surface of the dent and preheat the glue gun for 3-5 minutes 2. Select the appropriate gasket/puller tab, use enough glue to form a pad of about 1-2 mm between the metal and the gasket. (Glue gun & sticks are not included), if the dent is small, you just need to stick 1 galvanized iron spring, 2 iron springs for larger dent. 3. Stick the gasket/puller tab in the middle of the dent quickly(This step is very important). Then wait for 2 to 4 minutes for the glue to cool. 4. Set the gasket/puller tab in the bridge and twist to tighten the tab on the bridge. 5. After repairing, fill the alcohol bottle with alcohol and spray on the tab to clean ANY OTHER PROBLEMS WHILE OPERATING, PLEASE CONTACT US FREELY.
A**T
It took some practices but worthy!!!
Really effective popping a dent In my car. I bought it with the glue gun with discount, it's nice to bought together that the whole set of things really do the job. This is not something everyone can do. It takes some practices.Want to safe your £, just take it and try, you'll get something new!
S**I
Takes time to remove dents
Has some deep dents on the car this worked well to remove them, does require some patience, the build quality is solid and has many bits in the kit, overall decent unit gets the job done.
@**H
Skill required and is not for the faint-hearted person
This is a great device for getting out dents. Note you will require a glue gun and you will need to be careful from the heat the glue makes on your car.What you get:1 × Aerometal bridge dent puller1× Empty alcohol bottle1 × Instruction2 × Galvanized iron spring mount2 × Glue shovel13 × Blue glue puller tabThis is not for the faint-hearted person as I believe some skill and knowledge is required to carry out the task.Watch many YouTube videos and then try when confident. And be careful not to scratch your paintwork by accidentally making contact with the aluminium alloy bridge dent puller.All the rubber tabs are different in size and it may be difficult to pull out a dent bigger than your hand size.Great product but skill and a glue gun is required.
A**R
Made of cheese
This kit look great value but the tabs that you attach to the dent just break with the slightest pressure. not impressed and will spend a little more for a sturdier product
G**.
Very Impressed
I had a big dent on the top of the tank of my Yamaha Dragstar. After 30 minutes with this tool the dent was almost completely gone. You have to run your hand over the tank to feel any ripples. The dent was no longer visible. I could not believe how easy it was - maybe I was just lucky? Before using this tool I contacted a number of dent removal companies - I was told by the "experts" that they did not do tank dent removal as the metal was too thick! The only problem is that the purple "stickers" break quite easily.
D**T
A decent dent removing kit at a reasonable price
The contents of this kit are pretty standard part from one thing which is the part used to pull the dent out. On this kit it seems better than a cheap kit I previously bought. Overall the quality appears to be much better so I'm happy to recommend them.
H**O
Pull tabs snapped
Glued two of the puller tabs two the vehicle and they both snapped. Think the puller tabs need to be metal.
L**Y
Looks good quality just could do with everything you need.
Look good quality but just assumes you have a glue gun and the instructions are very minimal. Unfortunately it’s slightly too small for the dent I need it for. I’m not sure what the empty spray bottle is for?
Trustpilot
1 month ago
5 days ago
